Here is the spec sheet from Mouser for CDV16 (1000V) and CD16 (500V) caps.
http://www.cde.com/catalogs/CD-CDV16.pdf
Not much difference in current handling.
500 volt should be more than fine.
73
Jim W7RY
> -----Original Message-----
> From: ea8auw@gmail.com
> Sent: Sat, 21 Aug 2010 17:59:07 +0000
> To: amps@contesting.com
> Subject: [Amps] Mica Capacitorsn for TL 922 - Volts value ???
>
> Hello Everyone !
>
> I have that to swap some Mica caps, but I don't know the volts value of
> this.
>
> For example, in my Kenwood TL 922 amp. I can to see on the schematics
> C 59 it's a Mica cap. of 220pF + - 5% of tolerance, Kenwood parts
> number: CM93D2H21J and the description on the cap. it's 221J NTK.
>
> But, somebody know what it's the Volts value of this Mica ?? 500Volts ? 1
> Kv ?
>
> and the others mica caps volts value of TL 922, it's better also ??
> for to do a order soon of several caps.
>
> Thanks everyone !
>
> 73 de EA8AUW - Edu.-
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|