It does not have cover over the entire bottom. There are 2 small ones. On mine
a perforated cover covers the bottom side of the output tank and a solid one
covers the input circuits were the tube sockets are located and it is under
pressure from the blower. Hope that helps.
Gary K7GS
> From: d.gow@frontier.com
> To: amps@contesting.com
> Date: Thu, 8 Sep 2011 15:48:11 -0700
> Subject: [Amps] Henry 2KD-5 bottom cover
>
> My 2KD-5 is missing the bottom cover. Does anyone know if the original is
> solid or perforated? Also, If anyone has one that is available I would like
> to discuss buying it. Otherwise I will make one once I know if it is solid
> or not. I am concerned about cooling. Otherwise the amplifier works very
> well.
>
>
>
> Dave
>
> W7VM
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|