Carl,
Thanks Carl, I will be going thru it and plan to replace all the filter caps,
resistors, and the electrolytic. I got this amp in a trade
and although it has been converted to two 3CPX800's, he didnt do anything else
to it. Im pretty sure it still has the original filter caps
so it definetely needs these replaced.
I have another 76CA, my daily use amp, which I have converted over two two
3CPX800's, changed the filter caps plus the things you
recommended and it is running great.
BTW, what WARC bands are safe to use with the Alpha 76's ? If I remember,
there is one band I should avoid.
73,
Bob
K6UJ
On Mar 28, 2012, at 7:12 AM, Carl wrote:
> Id be more concerned about the PS if the filters havent been replaced. There
> are also a few resistors and a small electrolytic that change value/go leaky.
>
> An hour should be sufficient as that tube appears to age well if it isnt a
> well abused pull.
>
> Carl
> KM1H
>
>
> ----- Original Message ----- From: "Bob K6UJ" <k6uj@pacbell.net>
> To: <amps@contesting.com>
> Sent: Tuesday, March 27, 2012 11:48 PM
> Subject: [Amps] gettering question
>
>
>> With an amplifier that uses a pair of 3CPX800's, like my converted Alpha
>> 76CA, how long should I
>> let it sit there heating the filaments before using, when it hasn't been
>> used for 2 or 3 years ? Couple of hours, 1 day, ?
>>
>> Bob
>> K6UJ
>>
>>
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>>
>>
>> -----
>> No virus found in this message.
>> Checked by AVG - www.avg.com
>> Version: 10.0.1424 / Virus Database: 2113/4899 - Release Date: 03/28/12
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|