Hello Charles:
I have had no trouble running 4100 VDC for plate voltage on the 8877.
There are guys that run close to 5 KV.
73,
Tim K3LR
-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
Behalf Of Charles Bibb
Sent: Saturday, June 30, 2012 4:37 PM
To: amps@contesting.com
Subject: [Amps] addendum to 8877 plate voltage post
Forgot to add this in my last post about high 8877 anode voltage:
I've considered a "buck" transformer on the main transformer
primary. I only need to "buck" the input a few volts (less than 20).
Is this worth the trouble? Or should I just run it a tad high?
73,
Charles - K5ZK
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|