That's right Don; and combining the requisite drive power attenuation with
some NFC imparts several benefits; especially so with multiple paralleled
tube amplifier configurations.
Leigh
VK5KLT
-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
Behalf Of donroden@hiwaay.net
Sent: Wednesday, 4 July 2012 12:14 AM
To: amps@contesting.com
Subject: Re: [Amps] 8877 Plate Voltage
Properly designed, you will have both......
Don W4DNR
>> I think that if you put a resistor in *series* with the cathode circuit
>> (rather than an attenuator) this would provide NFB...
>>
>> Mike G8TIC
>
>
> Which is what I meant, I used "pad" in a very generic way which seemed to
> confuse someone.
>
> Carl
> KM1H
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|