John, you might try disassembling the meter and look for the cause of an
open circuit. Some times there is a small series resistor inside that can go
open circuit.
I had a 10vdc meter recently that was repaired that way.
73,
Gerald K5GW
In a message dated 9/4/2012 6:51:13 P.M. Central Daylight Time,
jasimmons@pinewooddata.com writes:
My amp works great except the multimeter (left side) doesn't work. After
take the front panel off (try finding Bristol wrenches at the hardware
store!) I find the meter movement is open :(.
Anyone have a working original Henry meter they would like to sell?
John NI0K
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|