| To: | key <hidesertdrifter@live.com>, amps@contesting.com |
|---|---|
| Subject: | Re: [Amps] BURNING IN A TUBE |
| From: | peter chadwick <g8on@fsmail.net> |
| Reply-to: | g8on@fsmail.net |
| Date: | Sat, 23 Mar 2013 18:24:46 +0100 |
| List-post: | <amps@contesting.com">mailto:amps@contesting.com> |
Depends on how 'new' the tube is. If it IS new, no need. If it's 'NOS', then it depends. It seems that generally ceramic tubes will just need the heater running (plus any forced air cooling for the seals) and if it's glass with a tantalum or zirconium coated plate, the plate needs to get red for a while. Any equipment should have been burned in to some extent before delivery. 73 Peter G3RZP _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [Amps] BURNING IN A TUBE, Bill Turner |
|---|---|
| Next by Date: | [Amps] 4CX1000A's, Bob Sullivan |
| Previous by Thread: | Re: [Amps] BURNING IN A TUBE, donroden |
| Next by Thread: | Re: [Amps] BURNING IN A TUBE, peter chadwick |
| Indexes: | [Date] [Thread] [Top] [All Lists] |