What do they mean by low grid current?
I would assume that for medical amps they require less drive and Ig for the
same output as higher Ig tubes but at lower IMD.
Im just surprised they dont quantify it.
Carl
KM1H
----- Original Message -----
From: "Robert Dorchuck W6VY via Amps" <amps@contesting.com>
To: <amps@contesting.com>
Sent: Wednesday, October 15, 2014 9:37 PM
Subject: Re: [Amps] SOURCE FOR 3CX800'S
Alpha has 3CX800A7's for $400. That's not much more than 4CX800's.
Bob W6VY
________________________________
From: Mike Tubby <mike@tubby.org>
To: amps@contesting.com
Sent: Wednesday, October 15, 2014 2:46 PM
Subject: Re: [Amps] SOURCE FOR 3CX800'S
Steve,
The 3CX800 is becoming a premium and "hard to get" tube... have you
considered modifying the Alpha to use 4CX800 (GU-74B) tubes which are
plentiful and cheaper?
Regards
Mike G8TIC
On 14/10/2014 23:31, Steve Bookout wrote:
Hello all,
Recently picked up an older Alpha and was thinking of making the
conversion to a pair of 3cx800's from the 3 x 8874's which are in the
amp.
Any suggestions on a source for good 3cx800 pulls?
73 de Steve, NR4M
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4765 / Virus Database: 4040/8395 - Release Date: 10/15/14
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|