Amps
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

[Amps] GS-35B

from [nemo zilch] [Permanent Link][Original]
To: amps@contesting.com
Subject: [Amps] GS-35B
From: nemo zilch <nemozilch@gmail.com>
Date: Sun, 9 Nov 2014 11:14:01 -0500
List-post: <amps@contesting.com">mailto:amps@contesting.com> 
I have one which I purchased from Dr. Alex.  It came with the cooler in a
separate box.  Does anyone know the recommended torque for the securing
nut?  Also I am wondering if it would be useful to put some heat transfer
compound on the joint before screwing it on.  Advice welcome and thanks in
advance.

Bob W4AOS


-- 
==========================================================
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
  • [Amps] GS-35B, nemo zilch <=
Previous by Date:  Re: [Amps] 8875 in Dentron MLA 2500B, Carl
Next by Date:  [Amps] 2x 4cx1500B's and a 4cx1000K socket., Benedikt Sveinsson
Previous by Thread:  Re: [Amps] 8875 in Dentron MLA 2500B, Fortra
Next by Thread:  [Amps] 2x 4cx1500B's and a 4cx1000K socket., Benedikt Sveinsson
Indexes:  [Date] [Thread] [Top] [All Lists]