Greetings John & Rich,
I have a ETO Alpha 374 and I'm looking at the largest toroid (2" high x
2´diameter which I believe is L4 - I don't have the schematic handy) and it
has 19 turns overall of 10 WAG solid tin plated wire covered with Teflon
sleeving. There are two taps within the 19 turns which appear to have 4
turns. Is this the information you were looking for? I wish I could send
you pictures but my main computer recently broke down and in the mean time
I'm just doing the bare minimum on my laptop.
73, George N2CG
-----Original Message-----
From: Amps [mailto:amps-bounces@contesting.com] On Behalf Of John/K4WJ
Sent: Saturday, November 29, 2014 2:28 PM
To: Amps@contesting.com
Subject: [Amps] Alpha 374 L4 Toroid Taps
Can anyone help my buddy Richard, KB4HF?
"I am trying to double check my L4 toroid I think it has 20 turns with taps.
I would like to verify where the taps are located.
The amp is a 374 with a silver face no tune 3 8874 tubes.
Rich KB4HF"
73..de John/K4WJ
John / K4WJ ex KN8PXG K8PXG K8WJ ZF2HZ
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|