Amps
[Top] [All Lists]

Re: [Amps] Amps Digest, Vol 148, Issue 10

To: amps@contesting.com
Subject: Re: [Amps] Amps Digest, Vol 148, Issue 10
From: Steve Wright <stevewrightnz@gmail.com>
Date: Tue, 07 Apr 2015 07:31:40 +1200
List-post: <amps@contesting.com">mailto:amps@contesting.com>


On 07/04/15 04:00, "Jim Thomson" <jim.thom@telus.net> wrote:
[....] With the correct flow rate into a GS35B,  oil temps should not be an 
issue,
provided that  a correct size rad is used, along with an expansion tank...aka  
de-gas bottle, plus pump for the job, etc, etc.
I have settled on two automatic transmission coolers in series. Each is 393x254x30 mm. Looks big hehe..

What is the de-gas bottle for?

I was going to vacuum the system out and charge it refrigeration-style. Vacuum out all the air, purge with nitrogen, vacuum out again, fill with oil, apply heat and hold vacuum on for 24 hours to de-gas, add +15psig nitrogen and cap it and seal it.

Steve

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>
  • Re: [Amps] Amps Digest, Vol 148, Issue 10, Steve Wright <=