Amps
[Top] [All Lists]

Re: [Amps] LK-500 ZB

To: "mike stokes" <mike9v@gmail.com>, "Amps" <amps@contesting.com>
Subject: Re: [Amps] LK-500 ZB
From: "Jim W7RY" <w7ry@centurytel.net>
Reply-to: Jim W7RY <w7ry@centurytel.net>
Date: Mon, 13 Apr 2015 20:52:33 -0700
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Sounds like a shorted tube. Is there negative grid current?

73
Jim W7RY


-----Original Message----- From: mike stokes Sent: Monday, April 13, 2015 12:25 PM To: Amps Subject: [Amps] LK-500 ZB
Hello
I have a Amp Supply LK-500 ZB and yesterday it made a big bang and blew
both fuses.  Now when I power it up the meter says it is drawing about 300
mA while sitting idle.  I have performed a visual inspection and there is
no visual evidence of anything being wrong.  I bought it used, so it is
uncertain if the power supply has ever been rebuilt.  Any thought were to
begin the troubleshooting ?  Is the p/s board worth rebuilding or should I
drop in a Harbach replacement board ?

Comments appreciated.

Thanks in advance and 73

--
Mike Stokes
KK9V
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>