I'm looking for the small - 1 inch by 1/4 inch coil that is in parallel
with a ceramic disc and attaches to the centre most HV Cap board on the
panel side end. Sorry for the poor description but I haven't been able to
reconcile the schematic to the physical location of the parts.
The coil I have is burnt but could possibly be rebuilt its only 12 or 13
turns but I don't know the size or source of the wire to use.
capacitor markings are 103P followed by 67.
Thanks all
Greg VE7GPG
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|