who cares? Buy another one!
On 19/12/15 06:00, amps-request@contesting.com wrote:
Send Amps mailing list submissions to
amps@contesting.com
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.contesting.com/mailman/listinfo/amps
or, via email, send a message with subject or body 'help' to
amps-request@contesting.com
You can reach the person managing the list at
amps-owner@contesting.com
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Amps digest..."
Today's Topics:
1. More on "baby ur radio" (Charles H)
----------------------------------------------------------------------
Message: 1
Date: Fri, 18 Dec 2015 00:59:04 +0000
From: Charles H <k4vud@hotmail.com>
To: Contest Internet <cq-contest@contesting.com>,
"amps@contesting.com" <amps@contesting.com>, "k4vud@hotmail.com"
<k4vud@hotmail.com>
Subject: [Amps] More on "baby ur radio"
Message-ID: <BLU182-W53700D59D2F5D9EA58F864F7E10@phx.gbl>
Content-Type: text/plain; charset="iso-8859-1"
On this reflector, I have poo-pooed the idea of baby-ing your radio especially
by turning it off often, lowering xmit power, etc.
However, I read that with ordinary tubes, the chemistry of the cathodes and filaments are affected
by life-of-use, so that tubes do "wear out" with use. Tubes can be rated in terms of
"hours of use" with the type in a KWM-2 rated at around 2,000 hours of useful function.
Thorium in the chemical make-up of the metal parts in a tube, maybe a metal or ceramic tube
(usually added to higher power tubes) can extend tube life to about 100,000 hours.
The conclusion is that "hours of use" of course do matter for hams intending to use their
tube-type radios for thousands of hours. The hours of use can be limited by simply turning the
tube off when having only stand-by function. However, there is some suggestion in the literature
indicating that every "turn on" of a tube (or an incandescent light bulb) involves rapid
heating of the elements inside which could, immediately or over time, deform elements and causing
sudden failure (given that the metal elements do heat unevenly--due to resistance in the metal--if
only for a very short duration of time). Repetition of on-and-off cycles are thus a factor in
lower tube life.
Other than these factors, it appears in the literature that operating a tube,
particularly high power transmitting tubes, at its rated values can extend life
IF it is otherwise not sometimes operated below or above its ratings. It
appears that, for example, driving an RF amplifying tube at its full rated
power does not materially decrease its life. Reducing drive appears not to
extend such tubes' life.
It is all a balancing act. 73, Charly
P.S., next question is "do transistors 'wear out'?"
------------------------------
Subject: Digest Footer
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
------------------------------
End of Amps Digest, Vol 156, Issue 9
************************************
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|