You got that right, the $325.00 price is just wrong.
Pay no more than $2-15 at Hamfest. I saw all sizes shapes and spec at
Orlando. Use ohms law to shunt it for current reading, resister dived it for
voltage readings, Free software on internet to print backing for meter and
your are done. Take the $300.00 you saved and put it towards a better
antenna system or buy the wife something, either will bring a smile to your
face.
73, Bruce, W8HW
===========
-----Original Message-----
From: Steve Bookout
Sent: Monday, March 13, 2017 13:19
To: amps@contesting.com
Subject: Re: [Amps] Alpha 77 meter and bezel needed
I can not imagine anyone wanting one 'that bad'.
Steve, NR4M
On 3/13/2017 11:48:AM, GWP wrote:
There are two ammeters in stock (NOS) on the Alpha factory web store.
https://www.alpharfsystems.com/?ec_store=meter-alpha-77sx-77dx-ammeter-black-case
Not sure if the meters in the Alpha store are OK for the 77, the parts
lists show a different part number for the 77 meter from the 77Dx/Sx
meters:
Glenn AE0Q
On Sun, Mar 12, 2017 at 7:32 PM, Tim Duffy <k3lr@k3lr.com> wrote:
I need a PLATE meter - right side of amp - one ampere full scale. Made
by
MODUTEC.
Also the mounting BEZEL that holds the meter on to the front panel.
Any leads, info, or used parts?
Thanks and 73
Tim K3LR
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|