Stan, I wasnt aware that OEP quit production, I used to buy many some years
ago.
Another place to check is Cardwell Condenser who is now part of Viking and
they still make the old Johnson 229 series..
Carl
----- Or
iginal Message -----
From: Stan Gammons
To: Carl ; amps@contesting.com
Sent: Wednesday, August 01, 2018 3:38 PM
Subject: Re: [Amps] Lube for roller inductor
Hi Carl,
MFJ said they use SAF-T-EZE anti-seize.
Oren Elliot no longer makes roller inductors. They said they stopped selling
them to MFJ around 20 years ago and MFJ makes their own roller inductors
now.
73
Stan
KM4HQE
On August 1, 2018 10:32:17 AM CDT, Carl <km1h@jeremy.qozzy.com> wrote:
Why not contact MFJ who builds theirs as well as Oren Elliot Products plus
Multi Tech Industries who builds "big" ones.Carl----- Original Message -----
From: "Stan Gammons" <s_gammons@charter.net>To: <amps@contesting.com>Sent:
Sunday, July 29, 2018 11:29 PMSubject: Re: [Amps] Lube for roller inductor
On 07/07/2018 01:05 PM, Bert wrote: I don't think Penetrox is a good idea
for a roller inductor. As far as I know, Penetrox is only conductive if put
under pressure. I would suggest one of the CAIG DeOxit products, e.g. DeOxit
5. Bert VE3NR Kind of reviving this thread since I have a roller inductor
that was acting a bit flaky, so I took it out and gave it a good cleaning
in my ultrasonic cleaner. No lubes left on it now and it's very clean. So,
what is general consensus, DeOxit D5 is Ok to use to use on the roller?
Unsure how much of a lubricant it is, but I know it's a great contact
cleaner. 73 Stan KM4HQE Amps mailing list Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps ---This email has been
checked for viruses by AVG.https://www.avg.com
---
This email has been checked for viruses by AVG.
https://www.avg.com
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|