Amps
[Top] [All Lists]

[Amps] SB220 changing SWR in bypass

To: "amps@contesting.com" <amps@contesting.com>
Subject: [Amps] SB220 changing SWR in bypass
From: Dick NY1E <dick@ny1e.com>
Reply-to: Dick NY1E <dick@ny1e.com>
Date: Wed, 26 Dec 2018 16:13:43 +0000 (UTC)
List-post: <mailto:amps@contesting.com>
 

    When I arrived back in Florida for the winter, first thing I did was stack 
my 6 M beams. When I go to operate I find my 1.1:1 match had moved to 51.8 Mhz. 
after fooling around with the antennas I eventually went back to the original 
single and the SWR was still at 51.8. It turns out the amplifier is causing it 
(in bypass mode) I remove the SB-220 (converted to 6M only) and the 1.1:1 is at 
50.1 again. Any ideas what could move my resonant point 1.7 Mhz?. It was fine 
when I left in the spring....de Dick NY1E
  
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
<Prev in Thread] Current Thread [Next in Thread>
  • [Amps] SB220 changing SWR in bypass, Dick NY1E <=