How much power can I run on FT8/FT4 with my new KPA1500 ?
A friend with the Expert amp limits his output to 1000 watts.
Ron KH6DV
Kaneohe Bay Hawaii
Sent from Mail for Windows 10
From: amps-request@contesting.com
Sent: Wednesday, July 7, 2021 6:25 AM
To: amps@contesting.com
Subject: Amps Digest, Vol 223, Issue 8
Send Amps mailing list submissions to
amps@contesting.com
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.contesting.com/mailman/listinfo/amps
or, via email, send a message with subject or body 'help' to
amps-request@contesting.com
You can reach the person managing the list at
amps-owner@contesting.com
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Amps digest..."
Today's Topics:
1. Relay Burnisher (jim.thom jim.thom@telus.net)
----------------------------------------------------------------------
Message: 1
Date: Tue, 6 Jul 2021 09:33:44 -0700
From: "jim.thom jim.thom@telus.net" <jim.thom@telus.net>
To: amps@contesting.com
Subject: [Amps] Relay Burnisher
Message-ID:
<CAB4ZMgu1qNx0_x3g9T0RqyLZmQhMrKC870h7Y=TMAH681pFj8g@mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"
Date: Mon, 5 Jul 2021 19:22:55 +0000
From: Kevin Adam <n9iww@LIVE.COM>
To: "amps@contesting.com" <amps@contesting.com>
Subject: [Amps] Relay Burnisher
< Burnisher with Black Plastic Insulated Handle, For Fine Contacts, 3"
Length x 3/16" <Width x 0.007" Thickness (3 count)
https://www.amazon.com/Jonard-OB-1-Burnisher-Insulated-Thickness/dp/B006C47JOI/ref=sr_1_4?dchild=1&keywords=file+relay&qid=1625512832&sr=8-4
<N9IWW
## we used hundreds of the exact same burnishing tool in the telco I
worked at. This was back in the electromechanical days. It was the NA
gold standard for burnishing relay contacts. Back then, they came in 10
or 20 packs. It's an ultra fine surface, so it doesn't destroy any
plating. What worked better for cleaning out dirty contacts was
...microscrubs...soaked in your favourite cleaning solution. 1-2 passes,
and contacts were like new.
I would be a bit leery using the burnishing tool on any gold plated
contacts though. My real fix for these relay issues is to swap to a
gigavc GH-1 ceramic vac relay for both the input and also the output.
Then an opto isolator for the cut off bias. I also use an opto
isolator for the soft key...or use your favourite switch transistor.
3PDT mech relays issues gone forever. Then it's qsk on cw if you want,
and no more tune and or load arcing due to slow mech relays, or mech relays
that are not quite sequenced correctly. IE: applying drive to the amp a
split second before the ant is connected on the output side.
Plus you can run a kw through the amp when on bypass mode. I use that
feature, so I can calibrate the wattmeter in my drake L4B amps. To do
that, I have to use one amp to feed a kw into the 2nd amp, with 2nd amp in
bypass mode, powered down, on its side, and bottom lid off, so I can get
to the calibration pots. I also use that feature since I string several
L4Bs in series...tuned up on diffrerant bands or ssb and cw on the same
band. . A rotary switch in the key line from Xcvr, ensures only one amp
can ever be in operate mode...simple mech interlock.
Jim VE7RF
------------------------------
Subject: Digest Footer
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
------------------------------
End of Amps Digest, Vol 223, Issue 8
************************************
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|