Amps
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [Amps] Triode Amps

from [Peter Voelpel] [Permanent Link][Original]
To: "'Kim Elmore'" <cw_de_n5op@sbcglobal.net>, <amps@contesting.com>
Subject: Re: [Amps] Triode Amps
From: "Peter Voelpel" <dj7ww@t-online.de>
Date: Thu, 2 Dec 2021 22:15:59 +0100
List-post: <mailto:amps@contesting.com> 
Eimac specifies 890W for a single tube at 3.5KV plate voltage and 740W at
3kV.

73
Peter, DJ7WW

-----Original Message-----
From: Amps [mailto:amps-bounces@contesting.com] On Behalf Of Kim Elmore


The 3-500Z is an excellent tube, but 1500 W isn't reasonably available 
out of a pair, even at increased plate voltage

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [Amps] Triode Amps, Victor Rosenthal 4X6GP
Next by Date:  Re: [Amps] Triode Amps, Tim Duffy
Previous by Thread:  Re: [Amps] Triode Amps, Victor Rosenthal 4X6GP
Next by Thread:  Re: [Amps] Triode Amps, Tim Duffy
Indexes:  [Date] [Thread] [Top] [All Lists]