A friend of mine recently acquired a Tokyo High Power HL350VDX /2M/ 300W amp
Some things in manual and in practice don't add up
1) The manual shows two 20 amp fuses, one in the positive line and one
in the negative line
2) the amp is advertised as 300W amp but in the manual it says it will
need 42A at 250 W out and no mention of what the typical draw at 300W
would be but I am guessing around 50A. The two 20amp fuses obviously
wont survive that and indeed somewhere around 150W out the amp does blow
the 20A fuses.
so I guess my questions are
1) IS this really a 300W amp or just 100W?
2) If it is a 300W watt amp how big a fuse does it really need 50A?
3) is the "42A @ 250W" a typo? and it really only draws say 22A @250W (
and there is a fault in this particular amp that causes it blow 20A
fuses) ?
4)250W out @42A would be about 44% efficiency of a 13.8 volt supply
seems reasonable so what size fuses? 50A?
Dave
NR1DX
--
Dave Manuals@ArtekManuals.com www.ArtekManuals.com
--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|