Got the AE9K Alpha 8410/8406 monitor program working. TNX to W10's
intransigence, I had to guess at which COM port it might be on. Then I
set the comm speed to 115400 bps, and the next time I started the
monitor program, it magically showed the amp. Have to get used to the
slow telemetry, however... not sure how far behind it is, but it's still
displaying my calling in a pileup, and I was last calling some 3 or 4
minutes ago =8-O
TNX,
SteveH K0XP
On 11/19/2023 10:38 PM, Steve Harrison wrote:
TNX, I'm not sure how I missed that listing, but I certainly did (or
perhaps it wasn't there when I first looked??).
Trying to sort out my COM ports in W10 right now; the ones with the
name the monitor program says the FTDI ports should have don't show up
yet.
TNX, Glenn...
SteveH K0XP
On 11/19/2023 7:27 AM, Glenn AE0Q wrote:
The file is on the Alpha 8410 web page:
https://www.alpharfsystems.com/?p=1467
You will need 7-Zip installed to extract it.
Glenn AE0Q
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
--
See my QRZ.com page at *https://www.qrz.com/db/K0XP*
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|