Antennaware
[Top] [All Lists]

[antennaware] Telrex/20m326

To: <antennaware@contesting.com>
Subject: [antennaware] Telrex/20m326
From: broz@csn.net (John Brosnahan)
Date: Tue, 29 Sep 1998 20:35:12 -0600 (MDT)
At 07:05 PM 9/29/98 -0600, you wrote:
>
>Gentelmen, I just bought a used Telrex 3 element 20 meter monoband beam,
>model 20m326.
>       The hardware is the heaviest duty I have ever seen. The 4 picture pages 
> of
>insrtuction I got with it are somewhat sketchy as far as instructions go,
>but I can figure almost everything out. I just have 1 question.
>               The manual shows a coaxial balun. the picture shows it, but 
> there is no
>mention of how long the coax is supposed to be. The drawing has an inset
>that says 1/2 wavelength. I cant imagine this balun is supposed to be 32
>feet long. The previous owner showed me the balun he had on it. Its 24 feet
>long, but he cant remember why. Anybody have information about how long this
>balun is supposed to be? The manual is very vague.
>
>       Thanks for any help,
>
>               Dave McPhie K7SX


Dave, it is a 1/2 wave 4:1  coaxial balun as covered in the various
antenna handbooks and ARRL Handbooks.  The coax length
is 1/2 wavelength long TIMES the velocity factor of the cable used.

This works out to be about 22.95 ft long for 14.150 MHz and a VF or
0.66 for RG-213.

gl

John  W0UN


--
FAQ on WWW:               http://www.contesting.com/antennaware-faq.html
Submissions:              antennaware@contesting.com
Administrative requests:  antennaware-REQUEST@contesting.com
Problems:                 owner-antennaware@contesting.com


<Prev in Thread] Current Thread [Next in Thread>