Hello Guys,
Can any one let me have a ENZEC models for a 2 and 3 element endfire K9AY array
and a 2 and 3 element FLAG array ( 1.8MHz 20m spacing will do fine ). I would
like to compare these to 2 and 3 element loop and vertical arrays.
Btw, I now have Rx 500kHz to 2MHz 3 element endfire phased loop array working.
I have added a varible gain/balance pot where the centre element is added to
the outer elements. This ensures that I can optimise the array F/B over the
band and it also compensates for minor amplitude differences due to the L/C
delaylines.
Thanks in advance
Andrew Ikin ( G8LUG not Active )
_______________________________________________
Antennaware mailing list
Antennaware@contesting.com
http://lists.contesting.com/mailman/listinfo/antennaware
|