I wonder if anyone has an EZNEC model of the cushcraft element for
the D3 dipole or an element of the A3S beam.
I would like to investigate a couple of ideas..
I have noticed that the element spacing on the A3S is identical to
the WARC A3WS.. So I wonder if I could get 18MHz on the A3S
(loosing the 14MHz) by just shortening the outer tips?
Secondly as I am very tight for space I was thinking of bending the
tips at 90degs (up or down) to shorten the wingspan.
73,
Dave, G3UEG
_______________________________________________
Antennaware mailing list
Antennaware@contesting.com
http://lists.contesting.com/mailman/listinfo/antennaware
|