The N1MM help file explains how to set up SO2R with MTTY.
Essentially, yes, you need two comm ports for N1MM and MMTTY.
And you need to install MMTTY in two different directories each with it's
own com port definition.
Then you need to set the sound card ID to the proper sound card if using
AFSK decoder too.
Then the 2nd interface window will come up and point.
Best wishes,
Richard
K5SF
>From: "ukbrown" <ukbrown@acsol.net>
>Reply-To: ukbrown@acsol.net
>To: cq-contest@contesting.com
>Subject: Re: [CQ-Contest] RTTY SO2R setup
>Date: Fri, 26 Jan 2007 18:26:07 GMT
>
> I am trying to get my SO2R to work with RTTY. Here are
>the rigs. Rig 1 FT1000mp Rig 2 FT1000D..two Rigblaster Plus
>DX Doubler..Built computer using Windows 2000XP Pro. MTTY
>and N1MM. We got the Rig 2 FT1000D to work through a spare
>com port on the computer.
>Here is my question. Do I need another com port on the
>computer to do the same as I have for Rig 2 inorder todo
>SO2R and will I need an additional sound card to accommdate
>this type of set up. Any help is appreciated. Please email
>ukbrown@aol.com or ukbrown@acsol.net
>73's PTL bill brown
>_______________________________________________
>CQ-Contest mailing list
>CQ-Contest@contesting.com
>http://lists.contesting.com/mailman/listinfo/cq-contest
_________________________________________________________________
Get in the mood for Valentine's Day. View photos, recipes and more on your
Live.com page.
http://www.live.com/?addTemplate=ValentinesDay&ocid=T001MSN30A0701
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
|