CQ-Contest
[Top] [All Lists]

Re: [CQ-Contest] Another long DOs and DONTs of QSLing

To: "'Charles Harpole'" <k4vud@hotmail.com>, <georgek5kg@aol.com>,<cq-contest@contesting.com>, <fcg@kkn.net>
Subject: Re: [CQ-Contest] Another long DOs and DONTs of QSLing
From: "Bill Parry" <bparry@rgv.rr.com>
Date: Tue, 5 Feb 2008 06:46:45 -0600
List-post: <mailto:cq-contest@contesting.com>
This is a great review for QSLing.  It is also reassuring.

I have comments about a couple of items.


"3.     Send via Air Mail.  If you know the DX station has postal theft
problems, send via Registered Mail (or via FedEx if you are really
desperate-one good FedEx is better than three lost Air Mails)."

According to my postmaster, all letters outside the US are sent Airmail. I
asked if I needed to affix a special Air Mail sticker or write Air Mail and
he said that I didn't need to. Those Air Mail stamps are real pretty and I
am always worried that my envelope might be intercepted by "stamp
collectors!"


"9.     If you are THANKING receipt of a QSL, mark that clearly or you will
get a second card and will waste time and money."

This is real good advice. On my cards I have the computer print this
particular information in RED. If I am sending return QSL, sure don't want
them to send me another one!


"12...
d.     Do NOT fold the currency bills EXACTLY in half."

I always send a $2 bill with SAE. This keeps me from having problems with
some of those countries that need more than $1 postage. I have always folded
the $2 bill in half and put one end inside the SAE so that it might be less
easily seen through the security envelope. Maybe I need to stop doing this.



It is real easy to print your envelopes with your computer and printer using
Microsoft Word. Use Tools/Letters and Mailings/Envelopes and Mailings. You
can preprint your outgoing and return envelopes including bar code on any
standard size envelope.  You can just "cut and paste" the address from
QRZ.com and paste it directly into "Word". This is particularly good for us
old guys, whose handwriting has become illegible.

Thanks for the reminders and heads up on things I didn't realize.

Bill W5VX
 



-----Original Message-----
From: cq-contest-bounces@contesting.com
[mailto:cq-contest-bounces@contesting.com] On Behalf Of Charles Harpole
Sent: Monday, February 04, 2008 4:19 PM
To: georgek5kg@aol.com; cq-contest@contesting.com; fcg@kkn.net
Subject: [CQ-Contest] Another long DOs and DONTs of QSLing


SUCCESSFUL QSLing
de HS0ZCW
 
Steps in sending a direct QSL to a DX station:
 
1.     Obtain correct address via qrz.com or use the GO List for QSL manager
addresses, or search the Web via Google.
2.     Consult the DX station's web site or web information for special
instructions (such as "direct only," "no IRC," or whatever).
3.     Send via Air Mail.  If you know the DX station has postal theft
problems, send via Registered Mail (or via FedEx if you are really
desperate-one good FedEx is better than three lost Air Mails).
4.     Write your own QSL card clearly in permanent black ink.
5.     Use UTC/GMT times and dates only.  Be sure to label which number is
the date and which number is the month and year (for example, is  9/2/03--
Sept. 2, 2003 or is it Feb. 9, 2003 or maybe March 2, 1999 or Feb. 3,
2003?).
6.     Clearly mark if your contact was a QSO or if you are a SWL.
7.     Be sure your own call sign is printed clearly ON THE SAME SIDE OF
YOUR CARD as the contact information (YOUR CALL SIGN ALONG WITH time, date,
band, mode, etc.).
8.     Use very clear type face for your printed call sign.  No Old English
type;  no cute curlicues, etc.  Put a slash in all zeros.  Be sure your
number one, your I and your lower case l (L) are clearly different (note
problems with 1, I and l, can you tell the difference?). Oh and Zero and V
and U are problems.  Use upper case block letters only.
9.     If you are THANKING receipt of a QSL, mark that clearly or you will
get a second card and will waste time and money.
10. Always enclose a self-addressed return envelope (sae) that has:
a.     Your complete address, printed CLEARLY, and include your 
country (not everyone knows AK is in the USA !).
b.    Do not affix postage to this envelope* unless you are absolutely sure
the DX guy can use it at his point of mailing.  (I get USA postage affixed,
but I want to mail it from Thailand. duh!)
c.     Try to avoid folding your sae;  use nesting envelopes.  If you just
must fold the sae, never fold it exactly in half !
d.    Use press-on/self-stick envelopes and fold the flap open--that is,
back over the address side so that the envelope is fully open.  OR, if you
use wet-to-seal glue envelopes, which are stronger, be aware that these may
self-seal in humid environments.  ALWAYS fold wet-to-seal envelopes open to
avoid self-sealing.
e.     Place the non-info side of your card against the sticky part of your
sae or place the green stamp against the sticky part of your sae.
f.      Do not put anything inside your sae.
g.     Write your call sign on the sae where that writing will be covered
when the sae is sealed by the DX operator-in the place where the glue will
stick.  This allows finding your envelope and your card when the two have
been accidentally separated.
h.     Because almost all mail today is air mail,  use pre-printed air mail
envelopes or print "air mail" on your sae.
i.       Envelopes that are pre-printed with "return postage paid" are GREAT
!
11.  The outer envelope:
a.      Do not seal your outer envelope so that a finger can not get into
the flap to open it.
b.    Use "security envelope" which has colored printing inside to retard
seeing through the outer envelope.
c.     You can not configure your envelope to stop postal theft so just use
normal sealing methods and skip inserting extra paper hoping to stop postal
people seeing through your envelope.  Super sealing jobs invite attention of
postal thieves.
d.     Do not write any ham radio information, like call signs, on the
outside of your envelopes.  Use non-smear permanent ink.
e.     Use post office frank for postage.  If you affix real stamps, you
invite theft of the whole envelope and contents so that the thief can steal
the stamps.
12. Also enclose:
a.      USA currency ($1 is almost enough these days, $2 is better, more 
if you feel generous)**.
b.     Try to avoid IRCs because of problems cashing them in**.
c.     *Loose postage for the DX operator's country, if you want to do an
extra favor.
d.     Do NOT fold the currency bills EXACTLY in half.
e.      If you send no sae, no currency, nor stamps, expect a card back via
the buro, if you get one at all.
f.       **If you are sure that the DX operator's country forbids its
citizens from having USD, it is best to include postage for that country or,
in last resort, use IRCs.
13.Note that 
a.  Some operators like to get a separate card for each contact, and it 
is probably best to QSL in this way.
b.     If you send cards in one envelop for more than one call sign
(generally, not a good practice), be sure to increase your donation for
return postage due to increased effort and cost.  
c.     The best envelopes are made of Tyvek which is very water resistant,
almost impossible to tear or puncture, but can be cut easily with a knife
for opening.  Write on Tyvek only with permanent markers to avoid wet
smears.  Tyvek does not take sticky labels well and needs extra long runs of
good tape.
14.Look at the mail you have prepared and mentally try to use what you 
have created.  That is, put yourself in the recipient's place and test 
your methods.
 
**Do not expect a return card just because you sent money.  Any money you
send is a free gift.  If you think otherwise, then you are purchasing a QSL
card which is contrary to the ham spirit.
 
Do not send a second request until 6 months have passed since the first
request.  Mark your second request with "second request."
 
Do not email the DX operator to inquire about your QSL or your contact until
a year has past.  But, be guided by his web site info.
 
Be sure you have envelopes on file with your buro. 
 
Look at http://www.ac6v.com/qsltips.htm, too.
 
Enjoy old fashioned paper. it is so personal and fun !
 
A note about postal theft:  Thieves who steal mail on a regular basis seek
envelopes that form a pattern:  (a) many similar ones to the same address,
(b) thickness more than 1 paper sheet, and (c) from rich countries.  Thieves
doing this regularly can not be stopped by inserted carbon paper, valuables
hidden inside inner envelopes, or other "tricks" because they simply open
ALL envelopes fitting the pattern, take the valuables, and destroy the rest
(thus destroying the evidence of their theft).  Some thieves steal only for
rare or odd stamps.  Ham radio QSL mail makes a very easily identifiable
pattern that simply can not be defeated by the usual tricks, so skip the
tricks.  Instead, try Registered Mail or, if desperate, use FedEx, UPS, or
DHL.  Even if you disguise your mail to look like an advertisement or
typewritten official mail, the determined regular thieves may well steal
EVERYTHING to an address known to get QSLs.
 
 
WHAT SHOULD BE PRINTED ON A GOOD QSL CARD?
 
Front of Card:
1.     The call sign in clear type face (see #8 above).
2.     The DXCC entity as given in DXCC list, not just the name of a
country***.
3.     ITU zone number
4.     CQ Magazine zone number
5.     Grid locator 
6.     Notation if this is an island (and IOTA number if possible).
7.     If USA, give county
8.     Latitude and longitude of the station location.
9.     Operator name and address*** or qrz.com notation.
 
 
On the front or rear of the card, this info needs to be added:
10. PSE or TNX QSL marked.
11. Use the standard info box with the info stated in this order, left to
right or on two lines:
a.     Confirming QSO with
b.    Day
c.     Month
d.    Year
e.     Time in UTC or GMT only
f.      Frequency or Band (band is all DXCC wants, but lots of ops like to
state the exact operating frequency in MHz-I like to put a freq that implies
either SSB, CW, or RTTY;  for example, I use 14.2 for 20meter SSB and 14.0
for 20meter CW contacts as a second indicator of the mode.
g.     RS(T)
h.     2-Way Mode.
11. If a computer printed label is used, try to format the label with these
same words and order of the information.
12. Sign the card with your name or initials.  For labels, make the strokes
of your pen signature touch a part of your label or use a uniquely shaped
rubber stamp stating "Verified by <your call sign>" that touches part of the
label.
13. Repeat your call sign on both sides of a double sided card.  
14. If you must use information formats that allow marking a choice of band
and mode, circle the correct band and mode words rather than marking out
what does not apply.  Be clear!  
15. If you have more than one call sign on your card, clearly mark which
call sign applies to this specific contact.
16.  ***If your card is for a DXCC entity that is a different country from
the mailing address, be sure to clearly state the DXCC entity for which this
card applies.
17. The most appealing art on a QSL is, first, an operator photo; second,
something personal and unique about the operator (family photo, pet, other
hobby, etc.) and otherwise pictures of unique local items.  A QTH locator
map is a nice touch.  I have seen rigs and antennas before-omit if not
really unique.  Pose your face turned toward the camera in front of your rig
or stand by your antenna to get it all in one photo.Charles
Harpolek4vud@hotmail.com > From: Georgek5kg@aol.com> Date: Mon, 4 Feb 2008
14:16:46 -0500> To: CQ-Contest@CONTESTING.COM; fcg@kkn.net> Subject: [FCG]
DOs and DONTs of QSLing> > Having just completed the answering of 1300+ E51
cards that have been > received, I offer the following DOs and DONTs of
QSLing:> > DO use envelopes with peel and stick flaps. They speed up sealing
of > envelopes.> > DO put your call sign in bold, large print on the same
side as the QSO > information.> > DO enclose enough postage or an IRC to
cover the cost of return postage. IF > this isn't possible, send the card
anyway with a self addressed envelope. > > DO not enclose small address
labels instead of envelopes.> > DO avoid extraneous enclosures. Personal
notes, canceled stamps, etc. should > be avoided unless critical. Sometimes
they are nice, but they slow down the > process.> > DO NOT use envelopes
without glue. They have to be taped shut, and that is a > real pain!> > DO
NOT seal envelopes so tightly that they can't be quickly opened with a >
letter opener.> > DO NOT mix cards to or from different call signs. They
really slow down the > processing of cards.> > DO NOT fold or "hide" IRCs or
Green Stamps so intricately that they are hard > to unfold when opening.> >
73, George, K5KG / E51MMM> > > George Wagner, K5KG> 941-312-9420>
941-400-1960 cell> > > > **************Biggest Grammy Award surprises of all
time on AOL Music. >
(http://music.aol.com/grammys/pictures/never-won-a-grammy?NCID=aolcmp0030000
00025> 48)> _______________________________________________> FCG mailing
list> Send mail - FCG@kkn.net> Change/edit subscription info -
http://www.kkn.net/mailman/listinfo/fcg> FCG Web site -
www.floridacontestgroup.org> Member Map -
http://www.frappr.com/floridacontestgroup> DXCluster - telnet to
n4ser.dyndns.org
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest

_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest

<Prev in Thread] Current Thread [Next in Thread>