CT-User
[Top] [All Lists]

[ct-user] CW Keying (ex-Newbie question)

To: <ct-user@contesting.com>
Subject: [ct-user] CW Keying (ex-Newbie question)
From: Alastair Beaton" <beaton@wintermute.co.uk (Alastair Beaton)
Date: Mon, 3 Nov 1997 13:41:40 +0000
Good idea to have a separate keying circuit - I suppose this may be 
inevitable. There are, however, two things to bear in mind:

1. A card adds significantly to the cost of the package - it would 
probably jump from $50 to $200. If it's a commercial product (i.e. 
the circuit can't be copied easily) the cost for a multi-multi effort 
could consequently rise from $50 to $1,200 or more.

2. Given that many people use notebooks (especially DXpeditioners) 
you'd have to provide a boxed circuit running via a serial or 
parallel port (and needing an extra power supply), rather than an 
internal card (otherwise you reduce your market even further).

73
Al, GM4BAP


------- Message Follows -------
To: <ct-user@contesting.com>
Date:          Mon, 03 Nov 1997 05:21:22 -0500
From:          Dwight Sipler <dps@hyperion.haystack.edu>
To:            ct-user@contesting.com
Subject:       Re: [ct-user] A Newbie's question

<clip>

So how hard would it be to incorporate a morse driver on a card? You
could send the text to the card in a burst and the card would control
the speed (after being given suitable setup and control commands from
the PC). This would divorce the morse from the PC clock and avoid all
the interrupt and timing problems.

Since there appears to be a market for voice cards out there, why not
incorporate the morse feature in the same card as an option? Is the CW
market not large enough?


--
Submissions:              ct-user@contesting.com
Administrative requests:  ct-user-REQUEST@contesting.com
WWW:                      http://www.contesting.com/ct/
Questions:                owner-ct-user@contesting.com

<Prev in Thread] Current Thread [Next in Thread>
  • [ct-user] CW Keying (ex-Newbie question), <beaton@wintermute.co.uk (Alastair Beaton) <=