Warren , tnx for your suggestion. I tried various baudrates < 4800Bd but
the
problem still not solved. When using Alt F1 or Alt F2 the Omni Vi Plus
still wont accept the bandchange but sometimes it will change bands when
typing in a frequency. I found that after typing in a frequency followed by
the + key (instead of the enter key) it changes to the new frequency almost
always..........but i dont want it to send it "tu pa3aav" all the time
after every change of frequency ....hi....73 Gert PA3AAV.
----------
> Van: Warren Walsh <wwalsh@intac.com>
> Aan: Gert3aav <pa3aav@hetnet.nl>
> Onderwerp: Re: [ct-user] ct9.36 and Omni VI Plus bandswitching
> Datum: woensdag 6 mei 1998 22:56
>
> At 05:29 AM 5/5/98 +0200, you wrote:
> > When checking out CT 9.36 with the Omni VI Plus I observed that when
> >changing bands by means of Alt-F1 or Alt-F2 the radio does not respond
> >correctly.It switchtes to the other band (or not) and goes back to the
band
> >it used to be on. The same happens when you type in a frequency. The
radio
> >switches to the new frequency and immediatley switches back to the old
> >frequency.However only seldom it picks-up the new frequency.It seems
like
> >that the new frequency is overwritten by the old one all the time. When
> >changing bands on the Omni, CT follows correct.
> >I have the radio configured (in menu 2) as follows: Bd 19200, C-id 04,
> >Cde ON.
> >When using CT9.23 with the same radio configuration all works fine.
> >Anyone noticed the same or has a solution ?
> >
> >73 Gert PA3AAV
> >
> >e-mail : pa3aav@hetnet.nl
> >
>
> Gert,
> I had a similiar problem. I resolved it by setting the baud rate to no
> more then 4800. Try this and see if it fixes your problem.
>
> Warren - K2BM
> wwalsh@intac.com
--
Submissions: ct-user@contesting.com
Administrative requests: ct-user-REQUEST@contesting.com
WWW: http://www.contesting.com/ct/
Questions: owner-ct-user@contesting.com
|