ok. cqww seems to work here ok with those 3 different radios on 9.51
Bill Hider wrote:
>
> CQWW
>
> ----- Original Message -----
> From: "David Robbins" <k1ttt@berkshire.net>
> To: "Bill Hider" <billhider@coriss.net>; "reflector ct-user"
> <ct-user@contesting.com>
> Sent: Saturday, October 21, 2000 4:33 PM
> Subject: Re: [ct-user] No SSB Mode with 9.49, 9.50 & 9.51
>
> > which contest?? with 9.51 in dxpn mode i can change mode and band ok on
> ts-940,
> > ts-850, and ft-1000mp.
> >
> > Bill Hider wrote:
> > >
> > > I cannot get CT to go into SSB mode with CT9.49, CT9.50 or CT9.51.
> > > It comes up into CW no matter what I select upon initialization.
> > > I have a CT.CFG file with SSB in it. I have also tried it without a
> > > CT.CFG - same problem.
> > >
> > > Using CT9.46 or CT9.26 it works fine. - All I did was overwrite CT.EXE
> > > and tested all 5 .EXEs (9.26, 9.46, 9.49, 9.50, 9.51)
> > >
> > > The symptom appeared as my IC-781 being put into CW mode upon each band
> > > change, yet I had selected SSB as the mode in CT.
> > > Also, the CW speed (ALT V) window appeared, yet SSB mode was selected.
> > >
> > > I notice in the RELEASE9.TXT for CT9.49 that there was a change to the
> > > mode in that version to: CW, SSB. Mixed. Did that introduce a bug? I
> > > tried all three of these modes. They all bring CT into CW mode in 9.49,
> > > 9.50, 9.51.
> > >
> > > My environment:
> > >
> > > IC-781 with radio control on COM3 @ 9600 bps
> > > P-200MMX PC, WIN 98 booted to F8 and selecting "Command Prompt Only"
> > > (The only way I run CT, BTW).
> > > DVP
> > >
> > > I have been using this configuration since 1997, and other similar
> > > configurations since 1991. Using CT since 1988.
> > >
> > > TNX!!
> > >
> > > Bill, N3RR
> > >
> > > --
> > > WWW: http://www.k1ea.com/
> > > Submissions: ct-user@contesting.com
> > > Administrative requests: ct-user-REQUEST@contesting.com
> > > Problems: owner-ct-user@contesting.com
> >
> > --
> > David Robbins K1TTT
> > e-mail: mailto://k1ttt@berkshire.net
> > web: http://www.berkshire.net/~robbins/k1ttt.html or http://www.k1ttt.net
> > AR-Cluster node: 145.69MHz or telnet://k1ttt.net
--
David Robbins K1TTT
e-mail: mailto://k1ttt@berkshire.net
web: http://www.berkshire.net/~robbins/k1ttt.html or http://www.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://k1ttt.net
--
WWW: http://www.k1ea.com/
Submissions: ct-user@contesting.com
Administrative requests: ct-user-REQUEST@contesting.com
Problems: owner-ct-user@contesting.com
|