Hello, all:
Can I use CT for a WPX M/2 operation? The CT9 manual says
only SO, M/S, and M/M are supported. I don't see anything
about this in the relkease notes. Also, I think the rules
about serial number handling changed for M/2 this year...
The release notes for 9.88 show the run1/run2 commands
and refer to serial numbers by transmitter (the old rule).
"Use a separate serial number sequence for each band
and include a unique identifier for each transmitter. Each
of the two stations may make a maximum of 8 band
changes in any clock hour (00 through 59 minutes)."
We can track band changes with a pencil and paper, but can
we get both a transmitter identifier (run1/run2) and serial
numbers by band?
We would prefer to use CT for this if we can get it configured
correctly.
Thanks and 73,
Mark, KD4D
_______________________________________________
CT-User mailing list
CT-User@contesting.com
http://lists.contesting.com/mailman/listinfo/ct-user
CT on the web: http://www.k1ea.com/
|