CT-User
[Top] [All Lists]

Re: [ct-user] ft450 support

To: <ct-user@contesting.com>
Subject: Re: [ct-user] ft450 support
From: "Endorf Family" <mendorf@isd.net>
Date: Fri, 27 Jun 2008 18:25:33 -0500
List-post: <ct-user@contesting.com">mailto:ct-user@contesting.com>
I had no luck with mine until talking with Scott N3FJP. I set up the radio
as an FT-2000.
I now have the FT-450 working with the N3FJP software, and N1MM. If CT
supports the FT-2000, then it should work. I was told the command structure
is 98% the same.

Mark - WA0MHJ

-----Original Message-----
From: ct-user-bounces@contesting.com
[mailto:ct-user-bounces@contesting.com]On Behalf Of Bob Schenck N2OO
Sent: Thursday, June 26, 2008 8:52 PM
To: 'Nate Bargmann'; ct-user@contesting.com
Subject: Re: [ct-user] ft450 support


No luck. Good thought though. I did discover the text command for the
FTDX9000 in the FJP logging program. I was able to get the interface to work
in there. But couldn't get the LPT keying to work in it. So, I have CT
working fine but with no rig interface. N3FJP has rig interface but no
keying. I can't win. We'll stick with CT and do manual band changes. Just
hope nobody goofs. Hi
Thanks again for the suggestion.

See ya' in the Pileups!
73!
Bob Schenck, N2OO
GO SJDXA! www.sjdxa.org
Old Barney ARC! www.obarc.org


-----Original Message-----
From: ct-user-bounces@contesting.com [mailto:ct-user-bounces@contesting.com]
On Behalf Of Nate Bargmann
Sent: Thursday, June 26, 2008 8:56 PM
To: ct-user@contesting.com
Subject: Re: [ct-user] ft450 support

* Bob Schenck N2OO <n2oo@comcast.net> [2008 Jun 26 17:16 -0500]:
> I need to know if anyone knows a way to interface an FT-450 with CT?
> Has anyone done it?
> I tried all the Yaesu rigs available with 4800 baud and no luck.
> Any hints? Or is this a dead issue?
> I need it for Field Day. Would rather not depend on the ops to change
bands
> manually.
> Any suggestions?

You may have success trying a Kenwood radio.  Seriously.  Starting with
the FTDX-9000 series, Yaseu went to a text command set very similar to
that used by Kenwood since at least the TS-850.  For frequency and band
setting it may just work.

Except for the FT-817 and '897 (does the '857 do CAT?) none of the new
Yaesu HF rigs support the old command set.  Working primarily in the
Yaesu backends of the Hamlib (http://www.hamlib.org) Project has given
me too much experience with them.  :-)

73, de Nate >>

--

"The optimist proclaims that we live in the best of all
possible worlds.  The pessimist fears this is true."

Ham radio, Linux, bikes, and more: http://n0nb.us/index.html
_______________________________________________
CT-User mailing list
CT-User@contesting.com
http://lists.contesting.com/mailman/listinfo/ct-user
CT on the web:  http://www.k1ea.com/

_______________________________________________
CT-User mailing list
CT-User@contesting.com
http://lists.contesting.com/mailman/listinfo/ct-user
CT on the web:  http://www.k1ea.com/

_______________________________________________
CT-User mailing list
CT-User@contesting.com
http://lists.contesting.com/mailman/listinfo/ct-user
CT on the web:  http://www.k1ea.com/

<Prev in Thread] Current Thread [Next in Thread>