:) Trees.....the need for higher powered radios. heh heh..
----- Original Message -----
From: "Andy Henckel" <andy@multibandcom.com>
To: "Karlnet Mailing List" <karlnet@WISPNotes.com>
Sent: Friday, May 23, 2003 9:27 AM
Subject: RE: [Karlnet] Real signal strength readings on PRISM 2.5 radios
> I have same problems. Seems like the values are reported incorrectly,
especially if you are shooting through a tree or some obstruction.
>
> -----Original Message-----
> From: Bob Hrbek [mailto:bhrbek@jagwireless.com]
> Sent: Thursday, May 22, 2003 12:39 PM
> To: Karlnet Mailing List
> Subject: Re: [Karlnet] Real signal strength readings on PRISM 2.5 radios
>
>
> Again....YUP, same here. I think the noise values appear every now and
> then but they are normally reported at -95. I really doubt that is the
> noise level. I have my cards flashed with 1.56 or something. I
downloaded
> it from Demarc or Mikrotik, I don't remember which.
>
> I am also using the engenius cards.
>
> -bob
> ----- Original Message -----
> From: "Caleb Carroll" <karlnet@pathcom.ca>
> To: "Karlnet Mailing List" <karlnet@WISPNotes.com>
> Sent: Thursday, May 22, 2003 1:08 PM
> Subject: Re: [Karlnet] Real signal strength readings on PRISM 2.5 radios
>
>
> > Here is a list of link test situations and what happens in each
situation:
> >
> > 1> Link Test from AP with Agere/Orinoco/Avaya card to Client with Prism
> 2.5 card: ALL VALUES REPORTED.
> > 2> Link Test from Client with Prism 2.5 card to AP with
> Agere/Orinoco/Avaya card: Local Levels NOT REPORTED. Remote Levels
> reported.
> >
> > 3> Link Test from AP with Prism 2.5 card to CPE with Agere/Orinoco/Avaya
> card: Local Levels NOT REPORTED. Remote Levels reported.
> > 4> Link Test from RG with Agere/Orinoco/Avaya card to AP with Prism 2.5
> card: ALL VALUES REPORTED.
> >
> > You should be able to see the pattern starting to develop here...
> >
> >
> > *********** REPLY SEPARATOR ***********
> >
> > On 2003-May-22 at 11:45 AM Bob Hrbek wrote:
> >
> > >same here
> > >----- Original Message -----
> > >From: "Norm Young" <lists@applegatebroadband.net>
> > >To: "Karlnet Mailing List" <karlnet@WISPNotes.com>
> > >Sent: Thursday, May 22, 2003 11:27 AM
> > >Subject: [Karlnet] Real signal strength readings on PRISM 2.5 radios
> > >
> > >
> > >> I'm using TC 4.31 and PRISM 2.5 radios. The radios have never given
> > >proper
> > >> signal strength readings. However I got the impression that if one
> > >upgraded
> > >> the firmware on the PRISM 2.5 radios, this problem disapears. I just
> > >> updated the firmware on some PRISM 2.5 radios to primary firmware
> v1.1.1,
> > >> and secondary firmware v1.5.6, but there is no change. Still, the
> local
> > >> readings are bogus.
> > >>
> > >>
> > >> _______________________________________________
> > >> Karlnet mailing list
> > >> Karlnet@WISPNotes.com
> > >> http://lists.wispnotes.com/mailman/listinfo/karlnet
> > >>
> > >
> > >_______________________________________________
> > >Karlnet mailing list
> > >Karlnet@WISPNotes.com
> > >http://lists.wispnotes.com/mailman/listinfo/karlnet
> >
> >
> >
> >
> > _______________________________________________
> > Karlnet mailing list
> > Karlnet@WISPNotes.com
> > http://lists.wispnotes.com/mailman/listinfo/karlnet
> >
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
|