Dan
Yes mounting brackets are included. Also we use heat sinks on the card to
help draw the heat away from the SCB this with the correct metal mounts and
metal enclosure seem to be working very well.
Sincerely, Tony Morella
Demarc Technology Group, A Wireless Solution Provider
Office: 908-996-7995 Cell: 908-246-9170 Fax: 908-847-0202
http://www.demarctech.com
> -----Original Message-----
> From: karlnet-bounces@WISPNotes.com
> [mailto:karlnet-bounces@WISPNotes.com] On Behalf Of Dan Metcalf
> Sent: Thursday, July 03, 2003 10:33 AM
> To: 'Karlnet Mailing List'
> Subject: RE: [Karlnet] Injection Moulded Outdoor Enclosure for WCPE+
>
>
> Tony,
>
> That unit is $49.95 with mounting brackets? what about heat
> when using the new 2 PCMCIA system w/ 2 of your 200mw cards?
>
> Thanks,
>
> Dan
>
>
> > -----Original Message-----
> > From: karlnet-bounces@WISPNotes.com
> [mailto:karlnet-bounces@WISPNotes.com]
> > On Behalf Of tonylist
> > Sent: Thursday, July 03, 2003 10:23 AM
> > To: karlnet@WISPNotes.com
> > Subject: [Karlnet] Injection Moulded Outdoor Enclosure for WCPE+
> >
> > We have aluminum NEMA4 enclosure for the boards already made and in
> stock.
> > The back plate has mounts for the WCPE+, also if need we can add a
> second
> > hole for a bulk head connector for the dual port board. The
> kit with
> > mounts and hardware is $49.95 with PoE $64.95 qty discount are
> > available:
> >
> http://www.demarctech.com/products/reliawave-ode/reliawave-rw-
> ode-8585-
> > kit.h
> > tml
> >
> > You can purchase online at: http://www.demarctech.com/store/catalog/
> >
> > Sincerely, Tony Morella
> > Demarc Technology Group, A Wireless Solution Provider
> > Office: 908-996-7995 Cell: 908-246-9170 Fax: 908-847-0202
> > http://www.demarctech.com
> >
> >
> >
> > > -----Original Message-----
> > > From: karlnet-bounces@WISPNotes.com
> > > [mailto:karlnet-bounces@WISPNotes.com] On Behalf Of Caleb Carroll
> > > Sent: Wednesday, July 02, 2003 5:13 PM
> > > To: karlnet@WISPNotes.com
> > > Subject: [Karlnet] Injection Moulded Outdoor Enclosure for WCPE+
> > >
> > >
> > >
> > > I'm looking into having 1000 of these made at an
> injection moulding
> > > facility. I have 2 questions for everyone on this list:
> > >
> > > - Anyone already getting an outdoor enclosure with N-Type
> and RJ45
> > > weatherproof bulkheads made? If yes, what dimensions & what NEMA
> > > rating?
> > > - Anyone interested in buying these if we go ahead an have them
> > > made? Price would be approximately $55-$60 US per unit including
> > > both bulhead connectors. Would be NEMA 3R (rain
> > > proof) or NEMA 4 (water proof).
> > >
> > >
> > >
> > > _______________________________________________
> > > Karlnet mailing list
> > > Karlnet@WISPNotes.com
> > > http://lists.wispnotes.com/mailman/listinfo/ka> rlnet
> > >
> > >
> >
> >
> >
> > _______________________________________________
> > Karlnet mailing list
> > Karlnet@WISPNotes.com
> > http://lists.wispnotes.com/mailman/listinfo/karlnet
> > ---
> > [This E-mail scanned for viruses by Declude Virus]
>
>
> ---
> [This E-mail scanned for viruses by Declude Virus]
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/ka> rlnet
>
>
|