I believe it is a issue of the design specs of the slot being 5v for
cardbus vs. 3.3v for pcmcia. There are probably some other issues as well
but it is equal to the technology advances in hard drives, USB, PCI, etc.
-bob
----- Original Message -----
From: "smyers" <wifiengineer@telsouth.net>
To: "'Karlnet Mailing List'" <karlnet@WISPNotes.com>
Sent: Friday, October 24, 2003 10:43 AM
Subject: RE: [Karlnet] 802.11a and SE-4505
> I would like to see the software support a manufacturer's card that is
> PCMCIA compatible with a/b/ and even possibly g support. I have about
> 50 units in operation in B and the idea that I can not upgrade to a
> because of a plastic connector design just doesn't make sense. I have
> seen some 802.11A cards with PCMCIA compatibility and I hope that the
> reason they are not incorporated into the release is because of $$$
> issues, as in the end we the consumer get the shaft.
>
>
> Kenneth "Scott" Myers
> Wireless Engineer
> smyers@telsouth.net
> (843) 842-7795 x 105
>
>
> -----Original Message-----
> From: karlnet-bounces@WISPNotes.com
> [mailto:karlnet-bounces@WISPNotes.com] On Behalf Of Bob Hrbek
> Sent: Friday, October 24, 2003 11:33 AM
> To: Karlnet Mailing List
> Subject: Re: [Karlnet] 802.11a and SE-4505
>
> cardbus
>
> it's been a standard for a while. Try to stick an 802.11a card in a
> RG-1000 the slots on the side of the card do not line up. It
> differentiates one standard from another.
>
> -bob
> ----- Original Message -----
> From: "smyers" <wifiengineer@telsouth.net>
> To: "'Karlnet Mailing List'" <karlnet@WISPNotes.com>
> Sent: Friday, October 24, 2003 10:30 AM
> Subject: RE: [Karlnet] 802.11a and SE-4505
>
>
> > Do you retract the statement about 802.11a not being PCMCIA
> compatible?
> > Would seem like a wasted market to anyone with a laptop then, which,
> > coincidentally, is the best client for wireless.
> >
> > Kenneth "Scott" Myers
> > Wireless Engineer
> > smyers@telsouth.net
> > (843) 842-7795 x 105
> >
> >
> > -----Original Message-----
> > From: karlnet-bounces@WISPNotes.com
> > [mailto:karlnet-bounces@WISPNotes.com] On Behalf Of Kevin Knuth
> > Sent: Friday, October 24, 2003 11:28 AM
> > To: 'Karlnet Mailing List'
> > Subject: RE: [Karlnet] 802.11a and SE-4505
> >
> > All,
> >
> > The real delay is waiting for two things:
> >
> > 1. The newest chipset from Atheros.
> > 2. Further development of our driver. When we did 802.11b with the
> Agere
> > cards, we basically overwrote parts of their driver. Atheros requires
> > you to write your own driver, from the bottom up! So there is a lot
> of
> > tweaking to be done. Good news- gives us control of the radio to the
> > MICROSECOND! Which is great for TurboCell. Bad news- takes time to
> get
> > it just right.
> >
> > Kevin
> >
> > **************************************
> > Kevin R. Knuth
> > Business Development Manager
> > North America
> > 260-424-9690 Regional Office
> > 614-822-5275 Corporate Office
> > kknuth@karlnet.com
> > www.karlnet.com
> > **************************************
> >
> >
> >
> > -----Original Message-----
> > From: karlnet-bounces@WISPNotes.com
> > [mailto:karlnet-bounces@WISPNotes.com] On Behalf Of smyers
> > Sent: Friday, October 24, 2003 9:15 AM
> > To: miguel@amplanet.com.br; 'Karlnet Mailing List'
> > Subject: RE: [Karlnet] 802.11a and SE-4505
> >
> >
> > As far as I am aware, the current Karlnet 4.3 does not support 802.11a
> > yet. It is in development and has an unslated release, although I
> > suspect sometime soon, as the manuals for their software and the
> > settings in the firmware all indicate it is available. Probably
> waiting
> > to see what drivers become the industry standard. (Orinoco?
> Prism?....
> > Hmmmm)
> >
> > Kenneth "Scott" Myers
> > Wireless Engineer
> > smyers@telsouth.net
> > (843) 842-7795 x 105
> >
> >
> > -----Original Message-----
> > From: karlnet-bounces@WISPNotes.com
> > [mailto:karlnet-bounces@WISPNotes.com] On Behalf Of
> > miguel@amplanet.com.br
> > Sent: Friday, October 24, 2003 10:57 AM
> > To: karlnet@WISPNotes.com
> > Subject: [Karlnet] 802.11a and SE-4505
> >
> > What kind of 802.11a pcmcia card I can use in a RG-1000 (SE-4505) or
> > AP-1000
> > (SE-4555) ?
> >
> > Best regards,
> >
> > Miguel
> >
> >
> > _______________________________________________
> > Karlnet mailing list
> > Karlnet@WISPNotes.com
> > http://lists.wispnotes.com/mailman/listinfo/karlnet
> >
> > _______________________________________________
> > Karlnet mailing list
> > Karlnet@WISPNotes.com
> > http://lists.wispnotes.com/mailman/listinfo/karlnet
> >
> >
> > _______________________________________________
> > Karlnet mailing list
> > Karlnet@WISPNotes.com
> > http://lists.wispnotes.com/mailman/listinfo/karlnet
> >
> > _______________________________________________
> > Karlnet mailing list
> > Karlnet@WISPNotes.com
> > http://lists.wispnotes.com/mailman/listinfo/karlnet
> >
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
|