Karlnet
[Top] [All Lists]

RE: [work] [Karlnet] 200mW radio cards and AP-1000

To: "'Karlnet Mailing List'" <karlnet@WISPNotes.com>
Subject: RE: [work] [Karlnet] 200mW radio cards and AP-1000
From: "Randy Byrd" <rbyrd@t-speed.net>
Reply-to: Karlnet Mailing List <karlnet@WISPNotes.com>
Date: Tue, 16 Mar 2004 22:45:27 -0600
List-post: <mailto:karlnet@WISPNotes.com>
I have an AP100 with 2 200mw engenius card it one side link satellite and
the other a base. It has been up with only twice lock up from over a year. 

I have found on other ap1000's that I need to use the 200 mw card on the
slot #1 and the lucent card on the second that it works just fine.

Randy Byrd

-----Original Message-----
From: karlnet-bounces@WISPNotes.com [mailto:karlnet-bounces@WISPNotes.com]
On Behalf Of Blair Drew Davis
Sent: Tuesday, March 16, 2004 9:35 PM
To: karlnet@WISPNotes.com
Subject: [work] [Karlnet] 200mW radio cards and AP-1000

I have seen  some comments on the list about 200mW radio cards being 
used in Lucent type AP-1000 hardware.

I had been informed that there were several problems with this, 
including power supply problems in the AP-1000 style hardware and Card 
Buss ver. PCMCIA interfaces.

Can anyone provide a list of the 200mW cards that are known to work in 
AP-1000 Lucent hardware?

Thanks

-- 
Blair Davis
Computer Adjusters of Allegan


AOL Instant Message Screen Name       theory240




_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet


_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet

<Prev in Thread] Current Thread [Next in Thread>