greetings to all...used na 9.26 in last nights sprint and ran into a few
problems...the enter key on the numeric keypad wont work to send a
packetspot(alt f3)...neither enter key works on the delay command (
change the cq/f1 rate) delay brings up the window the arrows let you
change the delay in seconds but then the only way to exit is via the esc
key and the delay is not changed...when pressing f8 to do a check partial
most of the time i got dumped to dos with a error 63 occured in scr_ovl
module..i was configured as single op but had tnc on com2 4800/irq 3 (by
the way when you bring up the tnc config both ports default to irq2 (?))
on a 386sx with 4meg ram w9xt card on lpt2...73 Jamie WW3S
--
Submissions: na-user@ve7tcp.ampr.org
Administrative requests: na-user-REQUEST@ve7tcp.ampr.org
Questions: owner-na-user@ve7tcp.ampr.org
|