Tyler Stewart wrote:
>
> >It was reported that the packet window wouldn't open on the remote
> >computers. It was supposed to have been fixed in 10.04. It still doesn't
> >work for us. Anybody have any luck here?
> >
> >73, Bill WD0GVY @ NC0P
> >--
>
> I am not having this problem at all. I just tested it last night and it
> worked fine. Be sure you have used the Config.exe program to set everything
> up properly: Unique station numbers for each computer, serial port
> assignments
> with proper interupts, etc. When starting up NA, be sure that you have set
> the local computer to TNC in the packet window and all others to REMOTE. Also
> make sure that each computer has the Network and Packet boxes checked off in
> the window just before the Keyer options screen.
>
> 73, Tyler KF3P
Thanks for the info Tyler but it doesn't work for me. I set the local
computer in the config for proper numbers and the local tnc. The remote
computer is a different station number and set for remote packet. On the
equipment screen I've set the local and remote for tnc and network. (I'm
using looping.) When I do an alt-T with the remote computer it crashes
and gives a "error 05 occured in module na1000 at address 0d6b:2a1a". I
get the same situation at my station and at NC0P's. I'm
frustrated. Thanks for your help. Any other suggestions?
73, Bill WD0GVY @ NC0P
--
dabs@worldnet.att.net
--
Submissions: na-user@ve7tcp.ampr.org
Administrative requests: na-user-REQUEST@ve7tcp.ampr.org
Questions: owner-na-user@ve7tcp.ampr.org
|