1. I would like to see frequencies in the .PRN file. This is a very good
indicator of what I was doing when I go back and review my log. With only
band information, I have no idea if I was S&Ping or CQing. It would also
give me a good indication of how hard I was working the 2nd radio.
2. Delay settings for auto-repeat should be programmable to 1/2 seconds
in my opinion. I dont know why, but getting exactly the right timing
seems to be important to me.
3. Auto start of CQ on SSB does not work. Example:
-Radio #1 is CQing away with the DVP.
-I que up a station on the 2nd radio with ALT-D.
-I hit F4 to send my call on the 2nd radio.
-At this point the DVP should automatically start CQing on Radio #1.
-After my report is received, I hit F2 to send the report on radio #2.
-The 1st radio starts CQing again.
This works perfectly on CW.
4. Another thing that is kind of broken... If I had the program in
the auto-CQ mode and the guy takes a long time to send me my report, the
program will start CQing on the 2nd radio. NA needs to completely disable
AUTO-CQ when a station is called on the 2nd radio and it should not be
re-enabled until I hit CQ again on the first radio. This stuff works
perfectly on CW.
If I didn't make this clear, I'll call you on the phone and we can talk it
through.
73
Bill - W4AN - K4AAA
--
Submissions: na-user@contesting.com
Administrative requests: na-user-REQUEST@contesting.com
WWW: http://www.contesting.com/datom/
Questions: owner-na-user@contesting.com
|