I finally got around to adding a PIEXX board to my TS940sat and trying
to get NA to work with it. Some things work, and some don't. After
some experimenting, it seemed like it was time to ask for some help and
information.
What works:
NA reads the band and mode
NA can change the mode
What doesn't:
NA can't read the frequency
NA can't tune the radio
NA can't set the frequency on either VFO
Configuration:
COM1 connected to PIEXX, XCVR1 @ 4800 baud
COM2 used for keying, set to NONE with config.exe
XCVR1 is set to KENWOOD1 (also tried KENWOOD2 and it didn't seem to matter)
COM2 set as paddle and keyer port
no other equipment to configure
Have I made a mistake? Is this working as expected for a TS940?
Thanks,
Rob
_______________________________________________
NA-User mailing list
NA-User@contesting.com
http://lists.contesting.com/mailman/listinfo/na-user
NA on the web: http://www.datomonline.com/
|