I've uploaded a new file that fixes the problem:
http://www.country-files.com/cty/index.htm#NA
I also put the new file into the cty-2006.zip file.
To ensure you have the correct file, either run NAU then NA and make
sure that it doesn't crash (!), or you can open the country.dat file
with notepad and look for this entry:
Canada: * 09: 05: NA: 044/079 VE:
CF,CG,CJ,CK,VA,VB,VC,VE;
&
VG,VX,XL,XM,CH1,CH2,CI0,CI1,CI2,CY1,CY2,CZ0,CZ1,CZ2,VD1,VD2,VF0,VF1,VF2,VO1,VO2,VY0;
& VY1,VY2,XJ1,XJ2,XK0,XK1,XK2,XN1,XN2,XO0,XO1,XO2,VER20101005;
See where it says "VER20101005", that means the file was created
today, not yesterday.
73 - Jim AD1C
On Tue, Oct 5, 2010 at 10:46 AM, Jim Reisert AD1C
<jjreisert@alum.mit.edu> wrote:
> On Tue, Oct 5, 2010 at 8:09 AM, Jim Monahan <K1PX@msn.com> wrote:
>
>> FYI, installing the new file displays the following error message in NA:
>>
>> "Loading sorted country data from DXCC.CTY Error 6 occurred in module
>> NA 1069 at address 0D4D:04D1"
>>
>> Reinstalling the previous file (CTY-2005) corrects the problem.
>>
>> Apparently the PJ changes are the issue.
>
> Hi Jim,
>
> I found the problem. It was with this entry in COUNTRY.DAT:
>
> Gabon: * 52: 36: AF: -00/348 TR: TR;
>
> The Latitude is shown as "-00" which apparently NA doesn't like. As
> you can see it had nothing to do with the PJ changes (I removed them
> first) but with my tool flow! I did see this when I was working on
> the programs, but dismissed it, saying to myself, "NA can handle
> this".
--
Jim Reisert AD1C, <jjreisert@alum.mit.edu>, http://www.ad1c.us
_______________________________________________
NA-User mailing list
NA-User@contesting.com
http://lists.contesting.com/mailman/listinfo/na-user
NA on the web: http://www.datomonline.com/
|