----- Original Message -----
From: Jim Monahan<mailto:K1PX@msn.com>
To: John Schaffner<mailto:k8ln@neo.rr.com>
Sent: Wednesday, October 30, 2013 2:23 PM
Subject: Re: [NA-User] change date
John:
Yes, you can.
I would make a copy of the file just in case there is an error.
Go to: C:\NA
Type: NAU
Select: F2
Select the .QDF file to be corrected.
A menu will pop up to change minutes, hours and days. They can
be added or subtracted. Positive numbers, in your case, will move it forward.
Once the time adjustment is made, press F1 to make the correction.
ESC will abort the change.
Jim, K1PX
K1PX@msn.com<mailto:K1PX@msn.com>
----- Original Message -----
From: John Schaffner<mailto:k8ln@neo.rr.com>
To: na-user@contesting.com<mailto:na-user@contesting.com>
Sent: Wednesday, October 30, 2013 12:09 PM
Subject: [NA-User] change date
NA,
Had a short window to operate (3 hrs.) had to reset the clock but didn't
notice that the date had change to 11 11 2013. Only have 225 qso's and
could change on at a time. Is there anyway to change them all at once?
John
K8LN
_______________________________________________
NA-User mailing list
NA-User@contesting.com<mailto:NA-User@contesting.com>
http://lists.contesting.com/mailman/listinfo/na-user<http://lists.contesting.com/mailman/listinfo/na-user>
NA on the web: http://www.datomonline.com/<http://www.datomonline.com/>
_______________________________________________
NA-User mailing list
NA-User@contesting.com
http://lists.contesting.com/mailman/listinfo/na-user
NA on the web: http://www.datomonline.com/
|