Orion
[Top] [All Lists]

[Amps] Xverter, SS brick and Tube Amplifier Sequencing?

To: "amps@contesting.com" <amps@contesting.com>,"Orion @contesting.com" <orion@contesting.com>
Subject: [Amps] Xverter, SS brick and Tube Amplifier Sequencing?
From: Joe Giacobello <k2xx@swva.net>
Reply-to: k2xx@swva.net
Date: Thu, 07 Jul 2005 08:58:55 -0400
List-post: <mailto:amps@contesting.com>
I am currently using a DEMI 6M transverter with my Orion to drive a 
VHF-1200 to about 400W output.  The DEMI puts out about 20W which can be 
reduced, if necessary, by reducing the drive from the Orion.  I have a 
150W Mirage brick that I could insert between the DEMI and the VHF-1200, 
and by adjusting the drive to the brick, I could get 40W out of the 
brick to obtain 750W from the VHF-1200.  The question is don't I have to 
sequence the PTT lines on the Amp and the brick so that the amp goes 
into transmit first followed by the brick, so that the amp is not hot 
switched?  If so, is there an easy way to accomplish the sequencing?

Thanks for your help.

73, Joe
K2XX

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>
  • [Amps] Xverter, SS brick and Tube Amplifier Sequencing?, Joe Giacobello <=