My suggestion would be to go to JPS's web site at www.jps.com
and contact their technical support for your questions. Give them your
serial number which will help them determine the vintage.
Good Luck,
Randy
WX5L
----- Original Message -----
From: "Loebel" <loebel@sbg.at>
To: <rfi@contesting.com>
Sent: Wednesday, August 14, 2002 11:58 AM
Subject: [RFI] JPS ANC-4
> Hello,
>
> I bought this item some times ago.
>
> Now I want to use it, I have the problem
> that it takes a long time to switch
> relay back to receive-mode (with ANC4 in
> action).
>
> In a manual I saw that there is a jumper inside
> to minimze this delay to 7ms.
>
> But after opening the ANC4 - no jumpers there
> as shown in the layout...
>
> Do I have an older version and is a
> modification also possible? It would make
> more sense to me. I think it is about half
> a second, and that is not fine during a QSO.
>
> Tank you for your advise.
>
> 73 de Guentehr/OE2LCM
> _______________________________________________
> RFI mailing list
> RFI@contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi
|