Re: [RFI] DSL Filter Update

["Cortland Richmond" <ka5s@earthlink.net>]

Hi, Larrry.

I'd hang a couple of 180 degree hybrids on there and sweep 'em.  100 ohms
is probably close enough.  I have a purpose-built North Hills center tapped
transfomer for UTP DSL measurements, but only one of those.   

Cortland
KA5S

> [Original Message]
> From: Larry Benko <xxw0qe@comcast.net>
>
> I have designed many devices in the T1/E1/DSL arena.  The line impedance 
> for lines (without bridged taps) was always 110 to 120 ohms.  The slight 


_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi