I can try a filter on the line cord, but a 60" projection TV is a little
big to wrap in AL foil.
David
KC2JD/4
K1TTT wrote:
> Well, you pretty much proved it is the tv... unless maybe you have it on a
> ups that gets noisy when it is loaded down.
>
> The easiest thing to fix is if it is from the line cord, add some ferrites
> or a line filter to see if that helps. If it is radiating straight from the
> case then you can try wrapping it in aluminum foil like my tv is.
>
>
> David Robbins K1TTT
> e-mail: mailto:k1ttt@arrl.net
> web: http://www.k1ttt.net
> AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
>
>
>> -----Original Message-----
>> From: David C. Hallam [mailto:dhallam@rapidsys.com]
>> Sent: Friday, March 13, 2009 13:57
>> To: RFI List
>> Cc: Shultz, Roger
>> Subject: [RFI] 20 Meter Noise Level
>>
>> Is it possible that my high noise level on 20M is related to my TV. I
>> have an older Mitsubishi big screen projection TV in the living room.
>> It is located directly under my 20M antenna. Most of the time I
>> experience a S5 to S6 noise level so weak signal are out of the
>> question. This morning I was listening on 20M and had the usual noise
>> level. My wife went out for the day. I turned the TV off noticed the
>> noise level dropped to S1. After turning the TV off and on several
>> times, it seems the noise level is directly related to the TV. Is it
>> possible and if so, any ideas how to tame it?
>>
>> David
>> KC2JD/4
>>
>> _______________________________________________
>> RFI mailing list
>> RFI@contesting.com
>> http://lists.contesting.com/mailman/listinfo/rfi
>
>
> _______________________________________________
> RFI mailing list
> RFI@contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi
>
>
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|