RFI
[Top] [All Lists]

Re: [RFI] RFI Digest, Vol 145, Issue 14

To: rfi@contesting.com
Subject: Re: [RFI] RFI Digest, Vol 145, Issue 14
From: Daniel Donnelly <kc7vda@gmail.com>
Date: Tue, 24 Feb 2015 09:44:59 -0700
List-post: <rfi@contesting.com">mailto:rfi@contesting.com>
 FYI :
I have been informed by my doc.that there was no need to worry about
pacemakers and microwave ovens. Actually, he  showed me a JAMA article that
reported tests on all brands of pacemakers presently manufactured in the
U.S.  the article came to the conclusion that pacemakers are NOT sensitive
to the amounts of  RF.leaked by microwave ovens
Didn't say anything about the older models of pacemakers though.

KC7VDA

On Mon, Feb 23, 2015 at 1:01 PM, <rfi-request@contesting.com> wrote:

> Send RFI mailing list submissions to
>         rfi@contesting.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
>         http://lists.contesting.com/mailman/listinfo/rfi
> or, via email, send a message with subject or body 'help' to
>         rfi-request@contesting.com
>
> You can reach the person managing the list at
>         rfi-owner@contesting.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of RFI digest..."
>
>
> Today's Topics:
>
>    1. Re: Zapped (Gary Smith via RFI)
>    2. Re: Zapped (D C _Mac_ Macdonald)
>    3. Re: Zapped (David Robbins)
>    4. Re: Low RFI 60w CFL bulb (w6rgs@cox.net)
>    5. Re: LED Tube Lights (Jim Brown)
>    6.  Zapped (Leonard Halvorsen)
>    7. Re: Zapped (qrv@kd4e.com)
>    8. Re: Zapped (David Cole)
>    9. Low RFI 60w CFL and LED bulb (Chris L. Parker)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Mon, 23 Feb 2015 09:43:56 -0800
> From: Gary Smith via RFI <rfi@contesting.com>
> To: rfi@contesting.com
> Subject: Re: [RFI] Zapped
> Message-ID: <54EB66DC.1000609@yahoo.com>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
> Take the MWO back to the vendor and complain to the high heavens !!
>
> We have a Panasonic model NN-H765BX that is 8yrs old and has not
> interfered  with the household router which sits less that a foot away
> from the MWO.
>
> Gary...wa6fgi
>
>
> On 2/23/2015 9:34 AM, Warren Wolff via RFI wrote:
> > Greetings:
> >
> > We just came to the conclusion that it is NOT
> > our ISP which is dive bombing us - - - after
> > 8 years in this home.
> >
> > Our &^#@!??? Panasonic microwave disconnects
> > our network from our computers.
> >
> > We bought a new, dual band router with ZERO
> > improvement.  Also, cannot use a cell phone within
> > 10 feet or so.
> >
> > Will wrapping the power cord around some ferrites
> > solve this?
> >
> > Otherwise, a nice microwave.  Hate to just toss
> > it.  Was thinking it might endanger someone visiting
> > with a pacemaker? ?
> >
> > Warren
> > W7WY
> >
> > _______________________________________________
> > RFI mailing list
> > RFI@contesting.com
> > http://lists.contesting.com/mailman/listinfo/rfi
>
>
>
> ------------------------------
>
> Message: 2
> Date: Mon, 23 Feb 2015 11:44:40 -0600
> From: D C _Mac_ Macdonald <k2gkk@hotmail.com>
> To: Warren Wolff <warrenwolff@aol.com>, "rfi@contesting.com"
>         <rfi@contesting.com>, W1RFI Ed Hare <w1rfi@arrl.org>
> Subject: Re: [RFI] Zapped
> Message-ID: <BLU178-W14471679A48929E4BE0834F1290@phx.gbl>
> Content-Type: text/plain; charset="utf-8"
>
> I'd say that that Panasonic needs to be reported to FCC and maybe
> Consumer's Union!
>
>  Ed Hare (W1RFI), are you seeing this one?
>
> * * * * * * * * * * *
> * 73 - Mac, K2GKK/5 *
> * (Since 30 Nov 53) *
> * k2gkk hotmail com *
> * Oklahoma City, OK *
> * USAF & FAA (Ret.) *
> * * * * * * * * * * *
>
>
>
> > To: rfi@contesting.com
> > Date: Mon, 23 Feb 2015 12:34:57 -0500
> > Subject: [RFI] Zapped
> > From: rfi@contesting.com
> >
> >
> > Greetings:
> >
> > We just came to the conclusion that it is NOT
> > our ISP which is dive bombing us - - - after
> > 8 years in this home.
> >
> > Our &^#@!??? Panasonic microwave disconnects
> > our network from our computers.
> >
> > We bought a new, dual band router with ZERO
> > improvement.  Also, cannot use a cell phone within
> > 10 feet or so.
> >
> > Will wrapping the power cord around some ferrites
> > solve this?
> >
> > Otherwise, a nice microwave.  Hate to just toss
> > it.  Was thinking it might endanger someone visiting
> > with a pacemaker? ?
> >
> > Warren
> > W7WY
> >
> > _______________________________________________
> > RFI mailing list
> > RFI@contesting.com
> > http://lists.contesting.com/mailman/listinfo/rfi
>
>
> ------------------------------
>
> Message: 3
> Date: Mon, 23 Feb 2015 11:47:07 -0600 (CST)
> From: David Robbins <k1ttt@verizon.net>
> To: rfi@contesting.com
> Subject: Re: [RFI] Zapped
> Message-ID:
>         <
> 1374649816.390223.1424713627959.JavaMail.root@vznit170072.mailsrvcs.net>
>
> Content-Type: text/plain; charset=UTF-8
>
> I would can the microwave, if it is leaking that much its probably the
> door seal or a bad design to start with.  I have 2 microwaves in the house
> and have no problem with running 3 waps with maybe 15-20 devices active on
> contest weekends.... with all the microwaving of meals and drinks during a
> large contest it would be obvious quickly if either of them caused
> something like that to happen.
>
>
> Feb 23, 2015 12:35:14 PM, warrenwolff@aol.com wrote:
>
>
> Greetings:
>
> We just came to the conclusion that it is NOT
> our ISP which is dive bombing us - - - after
> 8 years in this home.
>
> Our &^#@!??? Panasonic microwave disconnects
> our network from our computers.
>
> We bought a new, dual band router with ZERO
> improvement. Also, cannot use a cell phone within
> 10 feet or so.
>
> Will wrapping the power cord around some ferrites
> solve this?
>
> Otherwise, a nice microwave. Hate to just toss
> it. Was thinking it might endanger someone visiting
> with a pacemaker? ?
>
> Warren
> W7WY
>
> _______________________________________________
> RFI mailing list
> RFI@contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi
>
>
> ------------------------------
>
> Message: 4
> Date: Mon, 23 Feb 2015 09:50:12 -0800
> From: w6rgs@cox.net
> To: rfi@contesting.com
> Subject: Re: [RFI] Low RFI 60w CFL bulb
> Message-ID:
>         <20150223175003.DVOA8022.fed1rmfepo101.cox.net@fed1rmimpo305>
> Content-Type: text/plain; charset="us-ascii"; format=flowed
>
> I recently installed 3 CREE LED units in our home.  1 100W at the
> porch (34 feet from shack), 1 30-60-100W 3-way in the living room (30
> feet away) and 1 100W in the overhead light in the shack.  No RFI at
> all, HF, VHF or UHF.  I'm happy with them.
> Bill W6RGS
>
> At 09:37 AM 2/23/2015, Pat wrote:
> >FWIW, the "4 Flow" is an LED lamp, and was also hoping the Cree
> >lamps would be quiet.
> >
> >Pat
> >wa4tuk
> >
> >On 2/23/2015 12:17 PM, bill steffey wrote:
> >>too bad the CREE stuff tested poorly, i believe it is even American made
> ..
> >>
> >>Maybe they got some of their RF devices in the bulbs by mistake??.
> >>
> >>
> >>At 08:16 PM 2/22/2015, David Harmon wrote:
> >>>I have 3 of the GE energy smart bulbs on the driveway all night and
> there is
> >>>no noise.
> >>>
> >>>
> >>>73
> >>>
> >>>David Harmon
> >>>K6XYZ
> >>>Sperry, OK
> >>>
> >>>-----Original Message-----
> >>>From: RFI [mailto:rfi-bounces@contesting.com] On Behalf Of Chris L.
> Parker
> >>>Sent: Sunday, February 22, 2015 6:39 PM
> >>>To: rfi@contesting.com
> >>>Subject: [RFI] Low RFI 60w CFL bulb
> >>>
> >>>Hello Group,
> >>>
> >>>
> >>>A quick post regarding my RFI experience with CFL bulbs.
> >>>
> >>>I recently bought 3 brands of CFL bulbs at the local big-box DIY store
> for a
> >>>nightstand lamp.
> >>>
> >>>I placed my SW portable on the nightstand (about 1.5 feet from bulb) and
> >>>listened on 454 KHz, 4, 7, 14, and 21 MHz for RFI.
> >>>
> >>>I heard significant RFI from the Philips EnergySaver Silicone Coating
> 14w
> >>>=60w featuring TuffGuard protection, soft white, shatter resistant, 790
> >>>lumens, 2 pack.
> >>>
> >>>I heard significant RFI from the Cree 4Flow, 60w, 2700K, soft white,
> >>>dimmable, 815 lumens, single pack.
> >>>
> >>>I heard nil RFI from the GE energy smart, Bright from the Start, 60w
> uses
> >>>15w, 800 lumens, soft white, 2 pack.
> >>>
> >>>Thus, I recommend the GE energy smart, Bright from the Start CFL bulb
> for
> >>>RFI sensitive applications. As always, YMMV.
> >>>
> >>>Hope this helps.
> >>>
> >>>Chris
> >>>AF6PX
> >>>__________
>
>
> ------------------------------
>
> Message: 5
> Date: Mon, 23 Feb 2015 09:51:19 -0800
> From: Jim Brown <jim@audiosystemsgroup.com>
> To: rfi@contesting.com
> Subject: Re: [RFI] LED Tube Lights
> Message-ID: <54EB6897.1080904@audiosystemsgroup.com>
> Content-Type: text/plain; charset=windows-1252; format=flowed
>
> On Mon,2/23/2015 6:20 AM, rrath@charter.net wrote:
> > I am building a small shop and thinking about lighting the place with
> LED tube lights that fit
> > the T8 fluorescent lamp fixtures.
>
> For the last year or so, the primary lighting for my shack has been four
> of the smaller LED strips from the vendor on the link below. My strips
> are older and smaller than those listed here, and appear to be
> discontinued, but the newer larger ones are even nicer. Mine run from
> 12VDC, and the combination draws about 1.2A from the 12V battery bus
> that runs everything in my shack except the power amps. I found them in
> a booth at the Pacificon and Visalia ham conventions.
>
> https://www.wiredco.com/LED_Lighting_Low_Voltage_s/1874.htm
>
> For a shop, you would want a lot more light than my small system, but
> the beauty of a system like this is that the usual noise source for LED
> lighting, the power supply, is entirely within your control.
>
> 73, Jim K9YC
>
>
> ------------------------------
>
> Message: 6
> Date: Mon, 23 Feb 2015 12:56:58 -0500
> From: Leonard Halvorsen <lhalvors@pppl.gov>
> To: rfi@contesting.com
> Subject: [RFI]  Zapped
> Message-ID:
>         <
> CAJSVq52XQFTeEnU2AzYj+8p+m70mcP3exBC6LMhFo7+WFX7sSg@mail.gmail.com>
> Content-Type: text/plain; charset=UTF-8
>
> *Might only be the power-supply, not actual RF.*
> *I have a SHARP Micro-Nuker.*
> *I can hear it on the 162 Mc. Wx Channels.*
> *My  BROTHER  ANSWERING/FAX/COPIER MACHINE  puts quite a few spikes on 2
> Meters,*
> *with 2 or 3 BIG ones. The Scanning Head on top of the machine is the
> culprit.*
> *Had a touch-on/off lite that was really bad when the light was OFF.*
> *Touch it to turn it on, and the noise went away.*
> *Fish Tank heater was bad, too. Thermostat arced a few seconds prior to
> full-on.*
>
> *Leo.*
> *WA2AMW*
>
>
>
>  Greetings:
>
> We just came to the conclusion that it is NOT
> our ISP which is dive bombing us - - - after
> 8 years in this home.
>
> Our &^#@!??? Panasonic microwave disconnects
> our network from our computers.
>
> We bought a new, dual band router with ZERO
> improvement.  Also, cannot use a cell phone within
> 10 feet or so.
>
> Will wrapping the power cord around some ferrites
> solve this?
>
> Otherwise, a nice microwave.  Hate to just toss
> it.  Was thinking it might endanger someone visiting
> with a pacemaker? ?
>
> Warren
> W7WY
>
> _______________________________________________
> RFI mailing list
> RFI@contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi
>
>
> ------------------------------
>
> Message: 7
> Date: Mon, 23 Feb 2015 13:09:41 -0500
> From: "qrv@kd4e.com" <qrv@kd4e.com>
> To: RFI <rfi@contesting.com>
> Subject: Re: [RFI] Zapped
> Message-ID: <54EB6CE5.6010609@kd4e.com>
> Content-Type: text/plain; charset=UTF-8
>
> Our microwave is a Samsung SMH1622B over-the-stove
> 1.58 kW model.
>
> > The ASUS RT-16N, using the alternative Tomato OS,
> > has a setting to exclude non-Wifi interference.
> >
> > It works pretty well in our home - but if the
> > microwave is between the router and a device -
> > and the router/device signal isn't strong then
> > there will be some drop-out when the microwave
> > is running.
> >
> > David KD4E
>
>
> --
>
> *David* KD4E
> ARES-EC Bulloch County, Nevils, Georgia USA
>
> Safe & Secure Search Engine: duckduckgo.com
>
> Android for Hams: groups.yahoo.com/group/hamdroid
> Creative Tech: groups.yahoo.com/group/ham-macguyver
> Raspi Alternative: groups.yahoo.com/group/beagleboneblack/
>
> Restored to design-spec at Heaven's gate 1Cor15:22
>
>
> ------------------------------
>
> Message: 8
> Date: Mon, 23 Feb 2015 11:37:56 -0800
> From: David Cole <dave@nk7z.net>
> To: rfi@contesting.com
> Subject: Re: [RFI] Zapped
> Message-ID: <1424720276.7444.11.camel@nostromo.NK7Z>
> Content-Type: text/plain; charset="UTF-8"
>
> Mention leaky microwaves, and safety as well...
> --
> Thanks and 73's,
> For equipment, and software setups and reviews see:
> www.nk7z.net
> for MixW support see;
> http://groups.yahoo.com/neo/groups/mixw/info
> for Dopplergram information see:
> http://groups.yahoo.com/neo/groups/dopplergram/info
> for MM-SSTV see:
> http://groups.yahoo.com/neo/groups/MM-SSTV/info
>
>
> On Mon, 2015-02-23 at 09:43 -0800, Gary Smith via RFI wrote:
> > Take the MWO back to the vendor and complain to the high heavens !!
> >
> > We have a Panasonic model NN-H765BX that is 8yrs old and has not
> > interfered  with the household router which sits less that a foot away
> > from the MWO.
> >
> > Gary...wa6fgi
> >
> >
> > On 2/23/2015 9:34 AM, Warren Wolff via RFI wrote:
> > > Greetings:
> > >
> > > We just came to the conclusion that it is NOT
> > > our ISP which is dive bombing us - - - after
> > > 8 years in this home.
> > >
> > > Our &^#@!??? Panasonic microwave disconnects
> > > our network from our computers.
> > >
> > > We bought a new, dual band router with ZERO
> > > improvement.  Also, cannot use a cell phone within
> > > 10 feet or so.
> > >
> > > Will wrapping the power cord around some ferrites
> > > solve this?
> > >
> > > Otherwise, a nice microwave.  Hate to just toss
> > > it.  Was thinking it might endanger someone visiting
> > > with a pacemaker? ?
> > >
> > > Warren
> > > W7WY
> > >
> > > _______________________________________________
> > > RFI mailing list
> > > RFI@contesting.com
> > > http://lists.contesting.com/mailman/listinfo/rfi
> >
> > _______________________________________________
> > RFI mailing list
> > RFI@contesting.com
> > http://lists.contesting.com/mailman/listinfo/rfi
>
>
>
> ------------------------------
>
> Message: 9
> Date: Mon, 23 Feb 2015 12:01:40 -0800 (GMT-08:00)
> From: "Chris L. Parker" <parker601@earthlink.net>
> To: RFI List <rfi@contesting.com>
> Subject: [RFI] Low RFI 60w CFL and LED bulb
> Message-ID:
>         <
> 8624480.1424721700548.JavaMail.root@wamui-june.atl.sa.earthlink.net>
> Content-Type: text/plain; charset=UTF-8
>
> Hello Group,
>
> My apologies to the group. Pat, WA4TUK, is correct. The Cree "4 Flow" is
> an LED lamp. Thank you Pat!
>
> A few thoughts on the comments thus far.
>
> CFL are not designed for intermittent operation. It says so on the
> package. They are intended for driveway, porch, applications etc (low
> cycles) where they will be on for a few hours before being turned off.
>
> CFL's are not designed for "closed luminaires" e.g., where the lighting
> fixture has a frosted glass dome or cover. They also don't do well on
> ceilings where heat rises unless it is an open fixture. The little power
> supplies in the base of the bulb eventually fail from the heat, so you
> won't obtain the published lifetime in hours.
>
> The GE energy smart "Bright from the Start" start off bright, and then
> once warmed up, cut their brightness down. Kind of disconcerting at first,
> but you get used to it.
>
> The CREE LED bulb is intended for operation between -13F to +113F.
>
> It was a simple test that I performed. I was not only concerned with
> radiated RFI, but conducted RFI through the AC mains of the house. Thus,
> when I found the GE energy smart bulbs did not radiate, I assumed
> (unscientifically) that they were RFI "clean" with conducted emissions as
> well.
>
> Hope this helps.
>
> 73,
> Chris
> AF6PX
>
>
>
>
>
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> RFI mailing list
> RFI@contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi
>
>
> ------------------------------
>
> End of RFI Digest, Vol 145, Issue 14
> ************************************
>
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi

<Prev in Thread] Current Thread [Next in Thread>
  • Re: [RFI] RFI Digest, Vol 145, Issue 14, Daniel Donnelly <=