29vdc is an odd voltage choice. Any idea why they chose it?
Have you tried putting 24vdc to them?
That should be easier to find.
You could always tape some 18650 calls together to get the voltage you need,
then charge them when the lights aren't on ...
I'm looking for some 29v DC @ 210ma or slightly higher analog wall
warts to replace the switching garbage supplies that came with outdoor
LED Christmas lights. Filtering was a waste of time. Without analog
supplies these beautiful lights go right to the trash with their
switchers. I find nothing from the usual sources, including Mouser,
DigiKey, Jameco. 73, Jim W6YA
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|