When tuning RTTY signals, I use a.
(method) (example)
[X] Scope (MMTTY software type)
[ ] Scope (a real scope)
[ ] FFT display (a la MMTTY)
[ ] LED bar graph (PK-232)
[ ] LED x-y display (HAL DXP-38)
[X] by Ear
[ ] other (specify)
[ ] I never have to tune. I only CQ.
I tune by ear first and then waterfall FFT for fine tuning if needed.
I suspect I could do it by ear alone if I turned off the FFT, just
like I could probably touch type if I ever forced myself to...
My primary decoder is: (brand/model)
My secondary decoder is: (brand/model)
MMTTY for both
I have a ST8000 that I am having trouble getting back on the air but
have had no time for debugging it... I suspect it is related to the
serial port settings. I had a laptop that ran it fine but then the
laptop died and I lost the recipe...
- jeff wk6i
--
Jeff Stai jds@twistedoak.com
Twisted Oak Winery http://www.twistedoak.com/
Rocketry Org. of CA http://www.rocstock.org/
Amateur Radio WK6I ~ Calaveras County, CA
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|