ORIGINAL MESSAGE:
At 08:05 AM 4/1/2006, Charles Morrison wrote:
>Just a note, if the radio is left in autobaud, it wont reset itself if you
>load a program with a different baud rate. IE: I had ACLog set to 19.2 and
>Writelog set to 9600 and the radio set to autobaud. If I loaded either WL
>or ACL first, the other wouldn't work without resetting the radio. I of
>course solved it by setting all programs to the same, as well as locking in
>the baud rate on the radio. No problems after that.
*********** REPLY SEPARATOR ***********
Thanks for the info. I have always used a manual baud setting so I've
never experienced that, but it's good to know.
73, Bill W6WRT
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|