Hi guys
No diddling on RTTY!!!
The radio will not diddle at all, it happned when I changed today from PCI
soundcard to a USB sound card.
Suddenly I decided to disconnected the 13 pin from my microham box to the
TS2000, and I had the power on from the PSU both to the TS2000 and to the
MK.
I know LA7HJA changed two of this IC before, but its so boring to drive 4-5
hours on way to the repairs shop to fix a static electricity trouble.
Even I had 2 x 4mm ground wires from radio to PSU, I sure got some arc from
the PC?.
So now I cannot get any diddle on neither of my 2 USB MK boxes L
The unit which making the diddling in FSK is the IC11 .
This is IC11 on the rear of board of the TS2000m, and its connected to the
ACC2 13 pin.
Drawing on
http://www.la6fja.eu/ts2000.html
http://www.la6fja.eu/images/FSK%20unit.jpg
do anyone changed this before or have any idea if it possible to solder a IC
frame for the IC11 on the board?
Anyone have a idea how to measure this or to fix this to NOT happen ?..maybe
I should add som 100nF caps to the unit????
#---------------------------------------------------------------------------
-----#
Stein Roar Brobakken (aka RAG LA6FJA)
P.O.BOX 5
NO-2853 REINSVOLL
Norway
Telephone: +47 48 22 44 21
<mailto:la6fja@gmail.com> mailto:la6fja@gmail.com
skype:la6fja
HAMRADIO: LA6FJA - K3RAG - DU1/K3RAG
Member of: NRRL #LA-M 11387, WWYC#129, CTC#540, WE4YL SCDC DX Club,LA IOTA
Club, ARRL, PARA DX CLUB, Gjøvik- og Totengruppa av NRRL, Oppland DX Team
<http://www.la6fja.eu> www.la6fja.eu
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|
